You are here: Home > CLI Commands > Just_CLI_Topics > show ap-name

show ap-name

show ap-name [<profile-name>]

Description

This command shows the list of AP names.

Syntax

Parameter

Description

[<profile-name>]

Shows detailed configuration information for the specified AP name.

Usage Guidelines

Issue this command without the optional parameter to show the list of AP names. Include <profile-name> to show detailed configuration information for that AP name.

Example

The following example shows the AP name list:

(host) [mynode] #show ap-name

 

AP name List

------------

Name Profile Status

---- --------------

corp1

 

Total:1

The following example shows the configuration settings for an AP named corp1:

(host) [mynode] #show ap-name corp1

 

AP name "corp1"

-------------

Parameter Value

--------- -----

Virtual AP N/A

802.11a radio profile default

802.11g radio profile default

Ethernet interface 0 port configuration default

Ethernet interface 1 port configuration default

Ethernet interface 2 port configuration shutdown

Ethernet interface 3 port configuration shutdown

Ethernet interface 4 port configuration shutdown

AP system profile default

AP multizone profile default

802.11a Traffic Management profile N/A

802.11g Traffic Management profile N/A

Regulatory Domain profile default

RF Optimization profile default

RF Event Thresholds profile default

IDS profile default

Mesh Radio profile default

Mesh Cluster profile N/A

AM filter profile default

Provisioning profile N/A

AP authorization profile N/A

The output of this command includes the following parameters:

Parameter

Description

Virtual AP

Virtual AP profile that which configures a specified WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection..

Excluded Virtual AP

Excludes the specified mesh cluster profile from this AP.

802.11a802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps. radio profile

Profile that defines 802.11a802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps. radio settings for the AP.

802.11g802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network. radio profile

Profile that defines 802.11g802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network. radio settings for the AP.

Wired AP profile

Profile that defines wired port settings for APs assigned to the AP.

EthernetEthernet is a network protocol for data transmission over LAN. interface 0 link profile

Profile that defines the duplex and speed of the EthernetEthernet is a network protocol for data transmission over LAN. 0 interface on the AP.

EthernetEthernet is a network protocol for data transmission over LAN. interface 1 link profile

Profile that defines the duplex and speed of the EthernetEthernet is a network protocol for data transmission over LAN. 0 interface on the AP.

AP system profile

Name of the AP system profile for the AP.

802.11a802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps. Traffic Management profile

Name of the 802.11a802.11a provides specifications for wireless systems. Networks using 802.11a operate at radio frequencies in the 5 GHz band. The specification uses a modulation scheme known as orthogonal frequency-division multiplexing (OFDM) that is especially well suited to use in office settings. The maximum data transfer rate is 54 Mbps. WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. traffic management profile for the AP group.

802.11g802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network. Traffic Management profile

Name of the 802.11g802.11g offers transmission over relatively short distances at up to 54 Mbps, compared with the 11 Mbps theoretical maximum of 802.11b standard. 802.11g employs Orthogonal Frequency Division Multiplexing (OFDM), the modulation scheme used in 802.11a, to obtain higher data speed. Computers or terminals set up for 802.11g can fall back to speed of 11 Mbps, so that 802.11b and 802.11g devices can be compatible within a single network. WLANWireless Local Area Network. WLAN is a 802.11 standards-based LAN that the users access through a wireless connection. traffic management profile for the AP.

Regulatory Domain profile

Name of the regulatory domain profile for the AP.

RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. Optimization profile

Name of the RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. optimization profile for the AP.

RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. Event Thresholds profile

Name of the RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. event thresholds profile for the AP.

IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. profile

IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. profile for the AP.

Mesh Radio profile

Mesh radio profile assigned to the AP.

Mesh Cluster profile

Mesh cluster profile assigned to the AP.

Excluded Mesh Cluster profile

Excludes the specified mesh cluster profile from this AP.

Related Commands

Command

Description

ap-name

This command configures a specific AP.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/