You are here: Home > CLI Commands > Just_CLI_Topics > show ap provisioning-profile

show ap provisioning-profile

show ap provisioning-profile [<profile-name>]

Description

This command shows information for AP provisioning profiles.

Syntax

Parameter

Description

<profile-name>

The name of an existing AP provisioning profile.

Usage Guidelines

The AP provisioning profile allows you to define a set of provisioning parameters to an AP group. These settings can be saved or assigned to an AP group via the command ap-group <group> provisioning-profile <profile>.

Issue this command without the <profile-name> option to display the entire AP provisioning profile list, including profile status and the number of references to each profile. Include a profile name to display the authorization group defined for that profile.

Examples

The following example lists all AP provisioning profiles. The References column lists the number of other profiles with references to that provisioning profile, and the Profile Status column indicates whether the profile is predefined. User-defined AP provisioning profiles will not have an entry in the Profile Status column.

(host) [mynode] #show ap provisioning-profile

 

Provisioning profile List

-------------------------

Name References Profile Status

---- ---------- --------------

default 12

outdoor  3

To display the configuration settings for an individual profile, include the <profile> parameter. The example below shows the profile details for the AP provisioning profile Default.

(host) [mynode] #show ap provisioning-profile default

 

Provisioning profile "default"

------------------------------

Parameter Value

--------- -----

Remote-AP No

Master IP/FQDN N/A

PPPOE User Name N/A

PPPOE Password N/A

PPPOE Service Name N/A

USB User Name N/A

USB Password N/A

USB Device Type none

USB Device Identifier N/A

USB Dial String N/A

USB Initialization String N/A

USB TTY device data path N/A

USB TTY device control path N/A

USB modeswitch parameters N/A

Link Priority Ethernet 0

Link Priority Cellular 0

Cellular modem network preference auto

Username of AP so that AP can authenticate to 802.1X using PEAP N/A

Password of AP so that AP can authenticate to 802.1X using PEAP N/A

Enable AP to 802.1x using EAP-TLS Disabled Enable AP to use factory certificates when doing 802.1x EAP-TLS Disabled AP dot1x EAP-TLS username suffix Enabled AP dot1x EAP-TLS username suffix domain google.com

Uplink VLAN 0

USB power mode auto

AP POE Power optimization false

Description

This command defines a provisioning profile for an AP or group of APs.

Syntax

Parameter

Description

Remote-AP

Indicates that the profile is associated with a remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. using certificates.

Master IP/FQDN

The FQDNFully Qualified Domain Name. FQDN is a complete domain name that identifies a computer or host on the Internet. or IP address for Mobility Master.

PPPOE User Name

PPPoEPoint-to-Point Protocol over Ethernet. PPPoE is a method of connecting to the Internet, typically used with DSL services, where the client connects to the DSL modem. username for the AP.

PPPOE Password

Point-to-Point Protocol over EthernetEthernet is a network protocol for data transmission over LAN. (PPPoEPoint-to-Point Protocol over Ethernet. PPPoE is a method of connecting to the Internet, typically used with DSL services, where the client connects to the DSL modem.) password for the AP.

PPPOE Service Name

PPPoEPoint-to-Point Protocol over Ethernet. PPPoE is a method of connecting to the Internet, typically used with DSL services, where the client connects to the DSL modem. service name for the AP.

USB User Name

The PPPPoint-to-Point Protocol. PPP is a data link (layer 2) protocol used to establish a direct connection between two nodes. It can provide connection authentication, transmission encryption, and compression. username provided by the cellular service provider

USB Password

A PPPPoint-to-Point Protocol. PPP is a data link (layer 2) protocol used to establish a direct connection between two nodes. It can provide connection authentication, transmission encryption, and compression. password, if provided by the cellular service provider

USB Device Type

The USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. driver type.

USB Device Identifier

The USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. device identifier.

USB Dial String

The dial string for the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. modem. This parameter only needs to be specified if the default string is not correct.

USB Initialization String

The initialization string for the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. modem. This parameter only needs to be specified if the default string is not correct.

USB TTY device data path

The TTYTeleTypeWriter. TTY-enabled devices allow telephones to transmit text communications for people who are deaf or hard of hearing as well as transmit voice communication. device path for the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. modem. This parameter only needs to be specified if the default path is not correct.

USB TTY device control path

The TTYTeleTypeWriter. TTY-enabled devices allow telephones to transmit text communications for people who are deaf or hard of hearing as well as transmit voice communication. device control path for the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. modem. This parameter only needs to be specified if the default path is not correct.

USB modeswitch parameters

All the parameters that is required to be passed to the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. mode switch utility.

Link Priority Ethernet

Set the priority of the wired uplink, from 0-255. Each uplink type has an associated priority; wired ports having the highest priority by default.

Link Priority Cellular

The priority of the cellular uplink, from 0-255. By default, the cellular uplink is a lower priority than the wired uplink; making the wired link the primary link and the cellular link the secondary or backup link.

Cellular modem network preference

Multi-mode cellular modem network preference type.

Username of AP so that AP can

authenticate to 802.1X using PEAP

If your AP uses PEAPProtected Extensible Authentication Protocol. PEAP is a type of EAP communication that addresses security issues associated with clear text EAP transmissions by creating a secure channel encrypted and protected by TLS. authentication, this field displays the AP username.

Password of AP so that AP can

authenticate to 802.1X using PEAP

If your AP uses PEAPProtected Extensible Authentication Protocol. PEAP is a type of EAP communication that addresses security issues associated with clear text EAP transmissions by creating a secure channel encrypted and protected by TLS. authentication, this field displays the AP password.

Enable AP to 802.1x using EAP-TLS

Enables AP to perform 802.1x authentication using EAP-TLSEAP–Transport Layer Security. EAP-TLS is a certificate-based authentication method supporting mutual authentication, integrity-protected ciphersuite negotiation and key exchange between two endpoints. See RFC 5216..

Enable AP to use factory certificates when doing 802.1x EAP-TLS

Enables AP to use the factory certificates to perform 802.1x EAP-TLSEAP–Transport Layer Security. EAP-TLS is a certificate-based authentication method supporting mutual authentication, integrity-protected ciphersuite negotiation and key exchange between two endpoints. See RFC 5216. authentication.

AP dot1x EAP-TLS username suffix

Enables AP to use EAP-TLSEAP–Transport Layer Security. EAP-TLS is a certificate-based authentication method supporting mutual authentication, integrity-protected ciphersuite negotiation and key exchange between two endpoints. See RFC 5216. username suffix.

AP dot1x EAP-TLS username suffix domain

Sets the suffix domain for AP dot1x EAP-TLS username. If defined, use EAP-TLS username as suffix, else use aruba.ap.

Uplink VLAN

If you configured an uplink VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. on an AP connected to a port in trunk mode, the AP sends and receives frames tagged with this VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. on its EthernetEthernet is a network protocol for data transmission over LAN. uplink.

By default, an AP has an uplink vlanVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. of 0, which disables this feature.

USB power mode

The USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. power mode to control the power to the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. port.

AP POE Power optimization

Displays the AP POE power optimization status.

Usage Guidelines

The AP provisioning profile allows you to define a set of provisioning parameters to an AP group. These settings can be saved or assigned to an AP group via the command ap-group <group> provisioning-profile <profile>.

Related Commands

Command

Description

provision-ap

Change provisioning parameters for an individual AP. This command does not save the provisioning parameters settings in a reusable profile.

Command History

Version

Modification

ArubaOS 8.4.0.0

The output of the show ap-provisioning profile was modified to include the following parameters:

AP dot1x EAP-TLS username suffix

AP dot1x EAP-TLS username suffix domain

USB power mode

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/