You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug radio-event-log status

show ap debug radio-event-log status

show ap debug radio-event-log status {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}

Description

Show information about the radio event information captured in packet log files.

Syntax

Parameter

Description

ap-name <ap-name>

Show log information for an AP with a specific name.

ip-addr <ip-addr>

Show log information for an AP with a specific IPv4 address by entering its IPv4 address in dotted-decimal format.

ip6-addr <ip6-addr>

Show log information for an AP with a specific IPv6 address by entering its IPv6 address.

Example

Radio Event Logs

----------------

Radio Index Radio's Bssid Radio's Band Event Type Log File Size Status

----------- ------------- ------------ ---------- ------------- ------

0 00:24:6c:bd:65:b0 80211a N/A N/A start

1 00:24:6c:bd:65:a0 80211g N/A N/A stop

 

The output of this command includes the following information:

Parameter

Description

radio Index

Index number of the AP radio (0 or 1)

Radio's BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.

BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the AP radio. This is typically the AP radio's MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

Radio's BandBand refers to a specified range of frequencies of electromagnetic radiation.

BandBand refers to a specified range of frequencies of electromagnetic radiation. used by the AP radio.

Event Type

Type of events recorded. By default, all supported event types are recorded.

N/A: The default event type setting, which captures all supported types of radio events.

ani Adaptive Noise Immunity control events

rcfind: Transmission (Tx) control event

rcupdate: Transmission (Tx) rate update event

rx: Received (Rx) status register event

text: Text record event

tx: Transmission (Tx) control and Tx status register event

Log File Size

Size of the log file. A value of N/A indicates that the packet log feature uses the default log file size of 3145728 bytes (3MB)

Status

Shows if packet log capture was started or stopped on the AP radio.

Related Commands

Command

Description

ap debug radio-event-log

This command start and stops packet log capture of radio events for debugging purposes, and sends a log file of the events to a dump server when  logging stops.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/