You are here: Home > CLI Commands > Just_CLI_Topics > show ap remote auth-trace-buf

show ap remote auth-trace-buf

show ap remote auth-trace-buf {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}|{ip6-addr <ip6-addr>}

Description

This command shows authentication trace buffer on an AP.

Syntax

Parameter

Description

ap-name <ap-name>

Shows authentication trace buffer on an AP for specified AP name.

bssid <bssid>

Shows authentication trace buffer on an AP for specified BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

ip-addr <ip-addr>

Shows authentication trace buffer on an AP for specified IP address.

ip6-addr <ip6-addr>

Shows authentication trace buffer on an AP for specified IPv6 address.

Usage Guidelines

This command shows authentication trace buffer on an AP. For the remaining parameters, see the command syntax.

Example

The following example shows authentication trace buffer on an AP named ap-205:

(host) [mynode] #show ap remote auth-trace-buf ap-name ap-205

 

Auth Trace Buffer

-----------------

Related Commands

Command

Description

aaa auth-trace

This command sets parameters for debug tracing in AUTH (light weight tracing).

Command History

Release

Modification

ArubaOS 8.2.0.0

The ip6-addr parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/