You are here: Home > CLI Commands > Just_CLI_Topics > show ap remote debug association

show ap remote debug association

show ap remote debug association

{ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}[uac <uac>]

Description

This command shows the association table of the AP to identify the clients associated to each AP.

Syntax

Parameter

Description

ap-name <ap-name>

Shows client associations for the specified AP name.

bssid <bssid>

Show client associations for an specific BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.. A BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. is usually the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of an AP.

ip-addr <ip-addr>

Shows client associations for the specified IP address.

ip6-addr <ip6-addr>

Shows client associations for the specified IPv6 address.

Usage Guidelines

Use this command to verify if a remote user is connected to an AP and to validate the AP to which is connected.

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

The output of this command displays information about the remote clients associated with an AP with the IP address 192.0.2.32.

(host) [mynode] #show ap remote debug association ip-addr 192.0.2.32

 

Flags: W: WMM client, A: Active, R: RRM client

 

PHY Details: HT: High throughput; 20: 20MHz; 40: 40MHz

<n>ss: <n> spatial streams

 

Association Table

-----------------

Name bssid mac auth assoc aid l-int essid

---- ----- --- ---- ----- --- ----- -----

AP71 00:0a:23:c1:d4:11 00:16:6d:08:1s:f1 y y 1 10 t-lab

 

vlan-id tunnel-id phy assoc. time num assoc Flags

------- --------- --- ----------- --------- ----- 111 0x108e a 23s 1 A time

Num Clients:1

The output of this command includes the following information:

Column

Description

Name

Name of an AP.

bssid

The AP BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

mac

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the client.

auth

This column displays a y if the AP has been configured for 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. authorization frame types. Otherwise, it displays an n.

assoc

This column displays a y if the AP has been configured for 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. association frame types. Otherwise, it displays an n.

aid

802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. association ID. A client receives a unique 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. association ID when it associates to an AP.

1-int

Number of beacons in the 802.11802.11 is an evolving family of specifications for wireless LANs developed by a working group of the Institute of Electrical and Electronics Engineers (IEEE). 802.11 standards use the Ethernet protocol and Carrier Sense Multiple Access with collision avoidance (CSMA/CA) for path sharing. listen interval. There are ten beacons sent per second, so a ten-beacon listen interval indicates a listen interval time of 1 second.

essid

Name that uniquely identifies the AP’s ESSIDExtended Service Set Identifier. ESSID refers to the ID used for identifying an extended service set..

vlan-id

Identification number of the AP’s VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

tunnel-id

Identification number of the AP’s tunnel.

phy

The RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. bandBand refers to a specified range of frequencies of electromagnetic radiation. in which the AP operates:

a = 5 GHzGigahertz.

b, g = 2.4 GHzGigahertz.

assoc. time

Amount of time the client has associated with the AP, in the format hours:minutes:seconds.

num assoc

Number of clients associated with the AP.

flags

This column displays any flags for this AP. The list of flag abbreviations is included in the output of the show ap association command.

Command History:

Release

Modification

ArubaOS 8.2.0.0

The ip6-addr parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Configuration mode on managed devices.

/*]]>*/