You are here: Home > CLI Commands > Just_CLI_Topics > show ap remote debug sta-msg-stats

show ap remote debug sta-msg-stats

show ap remote debug sta-msg-stats {ap-name <ap-name> | ip-addr <ip-addr> | ip6-addr <ip6-addr>}

Description

This command shows statistics of messages between AP and ACAccess Category. As per the IEEE 802.11e standards, AC refers to various levels of traffic prioritization in Enhanced Distributed Channel Access (EDCA) operation mode. The WLAN applications prioritize traffic based on the Background, Best Effort, Video, and Voice access categories. AC can also refer to Alternating Current, a form of electric energy that flows when the appliances are plugged to a wall socket. relating to STA associations on the AP.

Syntax

Parameter

Description

ap-name <ap-name>

Shows statistics of messages between AP and ACAccess Category. As per the IEEE 802.11e standards, AC refers to various levels of traffic prioritization in Enhanced Distributed Channel Access (EDCA) operation mode. The WLAN applications prioritize traffic based on the Background, Best Effort, Video, and Voice access categories. AC can also refer to Alternating Current, a form of electric energy that flows when the appliances are plugged to a wall socket. relating to STA associations for specified AP name.

ip-addr <ip-addr>

Shows statistics of messages between AP and ACAccess Category. As per the IEEE 802.11e standards, AC refers to various levels of traffic prioritization in Enhanced Distributed Channel Access (EDCA) operation mode. The WLAN applications prioritize traffic based on the Background, Best Effort, Video, and Voice access categories. AC can also refer to Alternating Current, a form of electric energy that flows when the appliances are plugged to a wall socket. relating to STA associations for specified IP address.

ip6-addr <ip6-addr>

Shows statistics of messages between AP and ACAccess Category. As per the IEEE 802.11e standards, AC refers to various levels of traffic prioritization in Enhanced Distributed Channel Access (EDCA) operation mode. The WLAN applications prioritize traffic based on the Background, Best Effort, Video, and Voice access categories. AC can also refer to Alternating Current, a form of electric energy that flows when the appliances are plugged to a wall socket. relating to STA associations for specified IPv6 address.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

The following example shows an example for executing this command:

(host) [mynode] #show ap remote debug sta-msg-stats ap-name ap-205

Command History:

Release

Modification

ArubaOS 8.2.0.0

The ip6-addr parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/