You are here: Home > CLI Commands > Just_CLI_Topics > show ap remote debug anul-sta-entries

show ap remote debug anul-sta-entries

show ap remote debug anul-sta-entries {ap-name <ap-name>|ip-addr <ip-addr>|ip6-addr <ip6-addr>}

Description

Displays a list of VAPs and stations stored in the AP’s datapath.

Syntax

Parameter

Description

ap-name <ap-name>

Show LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. information for an AP with a specific name.

radio <radio>

Shows the radio ID. Valid values are 0 and 1.

ip-addr <ip-addr>

Show LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. information for an AP with a specific IPv4 address.

ip6-addr <ip6-addr>

Show LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. information for an AP with a specific IPv6 address.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example 1

Using the following example, for 320 Series check LAGLink Aggregation Group . A LAG combines a number of physical ports together to make a single high-bandwidth data path. LAGs can connect two switches to provide a higher-bandwidth connection to a public network. columns to see if any packets are dropped.

#show ap remote debug anul-sta-entries ap-name ap325

ANUL BSS Table for Radio 0

--------------------------

bssid num_stas data ready drops

----- -------- ----------------

AC:A3:1E:53:5C:F0 2 0

ANUL STA State

--------------

mac bssid aid data ready bss Drops LAG LAG drops

--- ----- --- ---------- --- ----- --- ---------

3C:A9:F4:24:B2:54 AC:A3:1E:53:5C:F0 2 Yes B 0 Yes 0

78:31:C1:BC:D6:12 AC:A3:1E:53:5C:F0 1 Yes B 0 Yes 0

The following parameters appear in the output of the show ap remote debug anul-sta-entries command, and are useful for debugging purposes.

Parameter

Description

bssid

The BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Id of the VAP.

num_stas

Indicates the number of stations associated to a VAP.

data ready drops

Indicates the total packets received and dropped before clients were ready to receive data packets.

ANUL STA State
mac

The MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of a client.

bssidBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.

The BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. Id of the VAP that the client is associated to.

aid

The association ID of the station.

data ready

Indicates if the client has completed authentication.

bss

Indicates if a client is associated to a BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. or not. The B flag indicates that the client is associated to a BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. . The F flag indicates that the entry is free and not attached to any BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. .

Drops

Indicates the number of data packets received and dropped before data ready is set to yes.

LAGLink Aggregation Group . A LAG combines a number of physical ports together to make a single high-bandwidth data path. LAGs can connect two switches to provide a higher-bandwidth connection to a public network.

Indicates if link aggregation is used to achieve HTHigh Throughput. IEEE 802.11n is an HT WLAN standard that aims to achieve physical data rates of close to 600 Mbps on the 2.4 GHz and 5 GHz bands. by transmitting the packets on both EthernetEthernet is a network protocol for data transmission over LAN. ports, for a given station. This field is displayed only in 320 Series access points.

LAGLink Aggregation Group . A LAG combines a number of physical ports together to make a single high-bandwidth data path. LAGs can connect two switches to provide a higher-bandwidth connection to a public network. drops

Indicates the number of packets dropped by the AP due to packets reordered in the network by link aggregation. This field is displayed only in 320 Series access points.

Command History

Version

Modification

ArubaOS 8.2.0.0

The ip6-addr parameter was added.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on managed devices.

/*]]>*/