You are here: Home > CLI Commands > Just_CLI_Topics > show ap standby

show ap standby

show ap {ap-name <ap-name> | bssid <bssid> | details |ip-addr <ip-addr> | ip6-addr <ip6-addr>}

Description

Show all APs in standby mode currently registered to a managed device.

Syntax

Parameter

Description

ap-name <ap-name>

View data for an AP with a specified name.

bssid <bssid>

View data for a specific BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

details

View AP data detailed columns.

ip-addr <ip-addr>

View data for an AP with a specified IP address by entering an IP address in dotted-decimal format.

ip6-addr <ip6-addr>

View data for an AP with a specified IPv6 address.

Usage Guidelines

This command displays details for all APs connected to a controller in standby mode.

Example

Execute the following command to view AP data detailed columns:

(host) [mynode] #show ap standby details

Related Commands

Command

Description

ap system-profile

This command configures an AP system profile.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/