You are here: Home > CLI Commands > Just_CLI_Topics > show ap vht-rates

show ap vht-rates

show ap vht-rates bssid <bssid>

Description

Show very-high-throughput (VHTVery High Throughput. IEEE 802.11ac is an emerging VHT WLAN standard that could achieve physical data rates of close to 7 Gbps for the 5 GHz band.) rates for an AP that supports 802.11ac802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band..

Syntax

Parameter

Description

bssid <bssid>

Show VHTVery High Throughput. IEEE 802.11ac is an emerging VHT WLAN standard that could achieve physical data rates of close to 7 Gbps for the 5 GHz band. rates for a specific Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) on an 802.11ac802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band.-capable AP. The Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.) is usually the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the AP radio.

Examples

The output of the command below shows very-high-throughput rates for 20 Mhz, 40 Mhz and 80 Mhz data streams with and without a short guard interval (SGI).

(host) [mynode] #show ap vht-rates bssid 6c:f3:7f:e7:51:f0

AP "Corp-ac" Radio 0 BSSID 6c:f3:7f:e7:51:f0 Very-high-throughput Rates (Mbps)

------------------------------------------------------------------------------

MCS Streams 20 MHz 20 MHz SGI 40 MHz 40 MHz SGI 80 MHz 80 MHz SGI

--- ------- ------ ---------- ------ ---------- ------ ----------

0 1 6.5 7.2 13.5 15.0 29.3 32.5

1 1 13.0 14.4 27.0 30.0 58.5 65.0

2 1 19.5 21.7 40.5 45.0 87.8 97.5

3 1 26.0 28.9 54.0 60.0 117.0 130.0

4 1 39.0 43.3 81.0 90.0 175.5 195.0

5 1 52.0 57.8 108.0 120.0 234.0 260.0

6 1 58.5 65.0 121.5 135.0 263.3 292.5

7 1 65.0 72.2 135.0 150.0 292.5 325.0

8 1 78.0 86.7 162.0 180.0 351.0 390.0

9 1 -- -- 180.0 200.0 390.0 433.3

0 2 13.0 14.4 27.0 30.0 58.5 65.0

1 2 26.0 28.9 54.0 60.0 117.0 130.0

2 2 39.0 43.3 81.0 90.0 175.5 195.0

3 2 52.0 57.8 108.0 120.0 234.0 260.0

4 2 78.0 86.7 162.0 180.0 351.0 390.0

5 2 104.0 115.6 216.0 240.0 468.0 520.0

6 2 117.0 130.0 243.0 270.0 526.5 585.0

7 2 130.0 144.4 270.0 300.0 585.0 650.0

8 2 156.0 173.3 324.0 360.0 702.0 780.0

9 2 -- -- 360.0 400.0 780.0 866.7

0 3 19.5 21.7 40.5 45.0 87.8 97.5

1 3 39.0 43.3 81.0 90.0 175.5 195.0

2 3 58.5 65.0 121.5 135.0 263.3 292.5

3 3 78.0 86.7 162.0 180.0 351.0 390.0

4 3 117.0 130.0 243.0 270.0 526.5 585.0

5 3 156.0 173.3 324.0 360.0 702.0 780.0

6 3 175.5 195.0 364.5 405.0 -- --

7 3 195.0 216.7 405.0 450.0 877.5 975.0

8 3 234.0 260.0 486.0 540.0 1053.0 1170.0

9 3 260.0 288.9 540.0 600.0 1170.0 1300.0

-- : not valid.

Range for 20 MHz: 6.5 - 288.9 Mbps

Range for 40 MHz: 13.5 - 600.0 Mbps

Range for 80 MHz: 29.3 - 1300.0 Mbps

 

The output of this command includes the following information:

Column

Description

MCS

A Modulation Coding Scheme (MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput.) values supported on this high-throughput SSIDService Set Identifier. SSID is a name given to a WLAN and is used by the client to access a WLAN network..

Streams

Number of spatial streams used by the MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. index value.

20 MHz

802.11n802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz. data rates for the MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. for 20 MHzMegahertz transmissions.

20 MHz SGI

802.11n802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz. data rates for the MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. for 20 MHzMegahertz transmissions using a short guard interval.

40 MHz

802.11n802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz. data rates for the MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. for 40 MHzMegahertz transmissions.

40 MHz SGI

802.11n802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz. data rates for the MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. for 40 MHzMegahertz transmissions using a short guard interval.

80 MHz

802.11n802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz. data rates for the MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. for 80 MHzMegahertz transmissions.

80 MHz SGI

802.11n802.11n is a wireless networking standard to improve network throughput over the two previous standards, 802.11a and 802.11g. With 802.11n, there will be a significant increase in the maximum raw data rate from 54 Mbps to 600 Mbps with the use of four spatial streams at a channel width of 40 MHz. data rates for the MCSModulation and Coding Scheme. MCS is used as a parameter to determine the data rate of a wireless connection for high throughput. for 80 MHzMegahertz transmissions using a short guard interval.

Related Commands

Command

Description

show ap ht-rates

Show high-throughput rate information for a basic service set (BSSBasic Service Set. A BSS is a set of interconnected stations that can communicate with each other. BSS can be an independent BSS or infrastructure BSS. An independent BSS is an ad hoc network that does not include APs, whereas the infrastructure BSS consists of an AP and all its associated clients. ).

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

This command will only show rate information for 802.11ac802.11ac is a wireless networking standard in the 802.11 family that provides high-throughput WLANs on the 5 GHz band.-capable APs

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/