You are here: Home > CLI Commands > Just_CLI_Topics > show ap wifi-uplink connection-trace

show ap wifi-uplink connection-trace

show ap wifi-uplink connection-trace {ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr>}

Description

Show the connection trace of APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink.

Syntax

Parameter

Description

Default

ap-name <ap-name>

Name of the AP with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. client.

default

bssid <bssid>

Name of the required BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the AP.

ip-addr <ip-addr>

IP address of the AP with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. client.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

(host) [mynode] #show ap wifi-uplink connection-trace ip-addr 10.65.45.61 WiFi uplink connection trace ---------------------------- 2019-02-27 19:37:41 auth -> 40:e3:d6:7f:2c:90 ac:a3:1e:d2:19:d0 retry=no; tries=0; status=success 2019-02-27 19:37:41 auth <- 40:e3:d6:7f:2c:90 ac:a3:1e:d2:19:d0 SN=1964; retry=no; status=0 2019-02-27 19:37:41 assoc req -> 40:e3:d6:7f:2c:90 ac:a3:1e:d2:19:d0 retry=no; tries=0; status=success 2019-02-27 19:37:41 assoc resp <- 40:e3:d6:7f:2c:90 ac:a3:1e:d2:19:d0 SN=1965; retry=no; status=0 2019-02-27 19:37:41 connection up * bssid=ac:a3:1e:d2:19:d0 2019-02-27 19:37:41 eapol-key <- 40:e3:d6:7f:2c:90 ac:a3:1e:d2:19:d0 ver=1; len=117

Related Commands

Command

Description

ap wifi-uplink-profile

This command configures a Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink profile.

Command History

Command

Description

ArubaOS 8.5.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/