You are here: Home > CLI Commands > Just_CLI_Topics > show ap wifi-uplink status

show ap wifi-uplink status

show ap wifi-uplink status {ap-name <ap-name> | bssid <bssid> | ip-addr <ip-addr>}

Description

Show the status of APs with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink.

Syntax

Parameter

Description

Default

ap-name <ap-name>

Name of the AP with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. client.

default

bssid <bssid>

Name of the required BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of the AP.

ip-addr <ip-addr>

IP address of the AP with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. client.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

The following example displays the status of the AP with Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink profile:

(host) [mynode] #show ap wifi-uplink status ip-addr 10.65.43.247 WiFi uplink status ------------------ SSID gran-uplink BSSID ac:a3:1e:d2:19:d0 Unitcast/Multicast Encryption wpa2-aes-psk wpa2-aes-psk Link Health (%) 20 AID 1 Associated Time 14m:55s Associated AP Beacon Time 10h:42m:53s Channel 149 RSSI 52 Noise Floor 96 Phy 5GHz-VHT-20sgi-3ss Maximum Speed (mbps) 288 Overall/Tx/Rx Goodput (mbps) 17.7 17 23.7 Last Tx Timestamp 2019-02-28 15:43:29 Last Rx Timestamp 2019-02-28 15:43:29 Last Tx Rate (mbps) 6 Last Rx Rate (mbps) 173 Last ACK RSSI 52

Related Commands

Command

Description

ap wifi-uplink-profile

This command configures a Wi-FiWi-Fi is a technology that allows electronic devices to connect to a WLAN network, mainly using the 2.4 GHz and 5 GHz radio bands. Wi-Fi can apply to products that use any 802.11 standard. uplink profile.

Command History

Command

Description

ArubaOS 8.5.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/