You are here: Home > CLI Commands > Just_CLI_Topics > show ap wired-port-profile

show ap wired-port-profile

show ap wired-port-profile [<profile-name>]

Description

Shows all AP wired port profiles and their status.

Syntax

Parameter

Description

Default

<profile-name>

Name of a wired AP profile.

default

Example

The example below shows that the controller has three wired port profiles. The References column lists the number of other profiles with references to the wired port profile, and the Profile Status column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status column.

(host) [mynode] #show ap wired-port-profile

 

AP wired port profile List

--------------------------

Name References Profile Status

---- ---------- --------------

default 3

NoAuthWiredPort 4 Predefined (editable)

shutdown 3 Predefined

Total:3

 

The following command displays information for an individual wired port profile:

 

(host)[mynode] #show ap wired-port-profile default

 

AP wired port profile "default"

-------------------------------

Parameter Value

--------- -----

Wired AP profile default

Ethernet interface link profile default

AP LLDP profile default

Shut down No

Remote-AP Backup Enabled

AAA Profile N/A

Time to wait for authentication to succeed 20 sec

Loop Protect Enable Disabled

Loop Detection Interval 1

Loop Protect Auto Recovery Enable Disabled

Loop Protect Auto Recovery Interval 300

Storm Control Broadcast Disabled

Storm Control Broadcast Threshold 2000

The output of this command includes the following information:

Parameter

Description

Wired AP profile

Name of a wired AP profile to be used by devices connecting the AP’s wired port. The wired AP profile defines the forwarding mode and switchport values used by the port.

Ethernet interface link profile

An EthernetEthernet is a network protocol for data transmission over LAN. Link profile to be used by devices connecting to the AP’s wired port profile. This profile defines the duplex value and speed to be used by the port.

AP LLDP Profile

Name of an LLDPLink Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol in the Internet Protocol suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802 local area network, which is principally a wired Ethernet. Profile associated with this wired port.

Shut Down?

Shows if the wired AP port is enabled (no) or disabled (yes).

Remote AP Backup

Use the rap-backup parameter to use the wired port on a Remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. for local connectivity and troubleshooting when the AP cannot reach the controller. If the AP is not connected to the controller, no firewallFirewall is a network security system used for preventing unauthorized access to or from a private network. policies will be applied when this option is enabled. (The AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. profile will be applied when the AP is connected to controller).

AAA Profile

Name of a AAAAuthentication, Authorization, and Accounting. AAA is a security framework to authenticate users, authorize the type of access based on user credentials, and record authentication events and information about the network access and network resource consumption. profile to be used by devices connecting to the wired port of the AP.

Time to wait for authentication to succeed

Authentication timeout value, in seconds, for devices connecting the AP’s wired port. The supported range is 1–65535 seconds, and the default value is 20 seconds.

Loop Protect Enable

Shows if loop protection is enabled or disabled.

Loop Detection Interval

Shows time in seconds after which a loop detection packet is transmitted on the AP port.

Loop Protect Auto Recovery Enable

Show if automatic recovery of the port in the AP that is shut down because of loop protection is enabled or disabled.

Loop Protect Auto Recovery Interval

Shows time in seconds after which automatic recovery of the port in the AP that is shut down because of loop protection is attempted.

Storm Control Broadcast

Shows if broadcast storm control is enabled or disabled.

Storm Control Broadcast Threshold

Shows broadcast packets per second on each EthernetEthernet is a network protocol for data transmission over LAN. port of an AP before the EthernetEthernet is a network protocol for data transmission over LAN. port is shut down.

Related Commands

Command

Description

ap wired-port-profile

This command configures a wired port profile.

Command History

Release

Modification

ArubaOS 8.3.0.0

Following parameters were introduced:

Loop Protect Enable

Loop Detection Interval

Loop Protect Auto Recovery Enable

Loop Protect Auto Recovery Interval

Storm Control Broadcast

Storm Control Broadcast Threshold

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/