You are here: Home > CLI Commands > Just_CLI_Topics > show ap wired stats

show ap wired stats

show ap wired stats {ap-name <ap-name> | ip-addr <ip-addr>} [client-ip <client-ip> | client-mac <client-mac>]

Description

This command shows statistics for campus and remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. wired clients.

Syntax

Parameter

Description

ap-name <ap-name>

Show wired AP statistics for a specified AP name.

ip-addr <ip-addr>

Show wired AP statistics for a specified AP by entering an IP address in dotted-decimal format.

client-ip <client-ip>

Show wired AP statistics for a specified client IP address.

client-mac <client-mac>

Show wired AP statistics for a specified client MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

Example

(host) [mynode] # show ap wired stats ap-name rap5wn client-mac 00:14:d1:19:3c:0b

 

AP Wired User Statistics

-------------------------

Counter Value

------- -----

Slot 0

Port 1

VLAN 1

TX Packets 78

TX Bytes 7894

RX Packets 37

RX Bytes 5352

TX Broadcast Packets 36

TX Broadcast Bytes 4410

TX Multicast Packets 22

TX Multicast Bytes 1990

The output of this command includes the following information:

Parameter

Description

Slot

Slot number

Port

Port number

VLAN

Associated VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. number

TX Packets

Number of packets sent

TX Bytes

Number of bytes sent

RX Packets

Number of packets received

RX Bytes

Number of bytes received

TX Broadcast Packets

Number of broadcast packets sent

TX Broadcast Bytes

Number of broadcast bytes sent

TX Multicast Packets

Number of multicast packets sent

TX Multicast Bytes

Number of multicast bytes sent

Related Commands

Command

Description

ap wired-ap-profile

This command configures a wired AP profile.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command Introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/