You are here: Home > CLI Commands > Just_CLI_Topics > show ap wired-ap-profile

show ap wired-ap-profile

show ap wired-ap-profile [<profile-name>]

Description

Show a list of all wired AP profiles, or display the configuration parameters in a specific wired AP profile.

Syntax

Parameter

Description

Default

<profile-name>

Name of a wired AP profile.

default

Usage Guidelines

The command show ap wired-ap-profile displays a list of all wired AP profiles, including the number of references to each profile and the profile status. If you include the optional <profile-name> parameter, the command will display detailed information for that one profile.

Example

The output of this command shows the configuration parameters for the wired AP profile “default”.

(host) [mynode] #show ap wired-ap-profile default

 

Wired AP profile "default"

--------------------------

Parameter Value

--------- -----

Wired AP enable Disabled

Trusted not trusted

Forward mode tunnel

Switchport mode access

Access mode VLAN 1

Trunk mode native VLAN 1

Trunk mode allowed VLANs 1-4094

Broadcast Broadcast

The output of this command includes the following information:

Column

Description

Wired AP enable

Indicates whether the wired AP profile is enabled or disabled.

Forward mode

The configured forward mode for the profile.

bridge: Bridge locally

split-tunnel: Tunnel to controller or NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. locally

tunnel: Tunnel to controller

Switchport mode

The profile’s switching mode.

access: Set access mode characteristics of the interface.

mode: Set trunking mode of the interface.

trunk: Set trunk mode characteristics of the interface.

Access mode VLAN

VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID of the access mode VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

Trunk mode native VLAN

VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID of the native VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

Trunk mode allowed VLANs

Range of allowed VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. IDs for the native VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

Trusted

Shows if the wired port on an AP using this profile is a trusted port. Possible values are Trusted or Not Trusted.

Broadcast

If set to broadcast, the wired AP port will forward broadcast traffic. If the parameter displays Do Not Broadcast, broadcast traffic will not be forwarded.

Related Commands

Command

Description

ap wired-ap-profile

This command configures a wired AP profile.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on the managed device or controller where the AP terminates.

/*]]>*/