You are here: Home > CLI Commands > Just_CLI_Topics > show ap debug airmatch-reports

show ap debug airmatch-reports

show ap debug airmatch-reports {[ap-name <ap-name>]|[ip-addr <ip-addr>]|[ip6-addr <ip6-addr>]

Description

This command displays information about AirMatch updates on an AP.

Syntax

Parameter

Description

ap-name <ap-name>

Shows AirMatch data on an AP specified by AP name.

ip-addr <ip-addr>

Shows AirMatch data on an AP specified by IP address.

ip6-addr <ip6-addr>

Shows AirMatch data on an AP specified by IPv6 address.

Usage Guidelines

Issue this command to show AirMatch measurement settings applied to the selected AP, as well as information about the last update for different AirMatch reports.

Example

The following example shows the latest AirMatch statistics on the AP Floor2-west.

(Host) [node] #show ap debug airmatch-report ap-name Floor2-west

 

AirMatch measure info

---------------------

report period (mins) measure duration (mins) measure state report enabled

-------------------- ----------------------- ------------- --------------

5 5 in progress yes

AirMatch report info

--------------------

AirMatch Report Type Count Last Update Time

-------------------- ----- ----------------

reporting radio 2 2016-07-05 22:01:12

neighbors 8000 2016-07-06 22:46:09

feasibility 730 2016-07-06 22:47:44

event 0 no update

 

The output of this command includes the following information:

Parameter

Description

report period

The AirMatch report period in the ap system profile

measure duration

The AirMatch measure duration in the ap system profile

measure state

The current AirMatch measurement state. Possible states are in progress, stopped, and waiting.

Report enabled

This value is expected to be the same as the airmatch-report-enabled setting in the ap system profile.

Related Commands

Command

Description

airmatch profile

This command configures the AirMatch profile.

airmatch ap

A radio set with the airmatch ap freeze command uses a static radio configuration until those settings get explicitly canceled with the airmatch ap unfreeze command.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Mobility Master.

/*]]>*/