You are here: Home > CLI Commands > Just_CLI_Topics > show cluster-config

show cluster-config

show cluster-config

Description

This command show the cluster configuration for the control plane security feature.

Syntax

No parameter.

Usage Guidelines

When you issue this command from the cluster root, the output of this command shows the cluster role of the managed device, and the IP address of each member node in the cluster.

When you issue this command from a cluster member, the output of this command shows the cluster role of the managed device, and the IP address of the cluster root.

Example

In the example below, the Cluster Role section in the output of this command shows that the managed device on which the command was issued is the cluster root. The Cluster IPSEC Controllers section of the output shows the IP address of each cluster member.

(host) [mynode] (config) #show cluster-config

 

Cluster Role

------------

Root

----

 

Cluster IPSEC Controllers

--------------------------

Switch IP address of Cluster-Members Key

------------------------------------ ---

172.21.18.18 ********

172.21.18.19 ********

Related Commands

Command

Description

control-plane-security

Configures the control plane security profile.

cluster-member-ip

Sets the controller as a control plane security cluster root, and specifies the IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. key for a cluster member.

cluster-root-ip

Sets the controller as a control plane security cluster member, and defines the IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. key for communication between the cluster member and the controller’s cluster root.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode on cluster member or cluster root controllers.

/*]]>*/