You are here: Home > CLI Commands > Just_CLI_Topics > show ap arm client-match unsupported

show ap arm client-match unsupported

show ap arm client-match unsupported

Description

If the client match feature is enabled, the output of this command displays a list of clients that failed to be steered to a more optimal AP, and the reason the initial steering request was triggered.

Syntax

No parameters.

Usage Guidelines

The controller also keeps track of the number of times the client match feature failed to steer a client to a different radio, and the reason that each steer attempt was triggered. If the client match feature attempts to steer a client to a new radio multiple consecutive times for the same reason but client steering fails each time, the controller notifies the AP to mark the client as unsteerable for that specific trigger.

Example

(host) #show ap arm client-match unsupported

 

Client Match Unsteerable Clients

---------------------------------

MAC Unsteerable Flags Last Steer Time Expiry Time Total steers/successful

--- ----------------- --------------- ----------- -----------------------

S: Sticky L: Load Balance H: HE Steer B: Bandsteer I: IOS T: Temporary D(I): dot 11v IOS M: MU steer (R): Rule based Vo: Voice Roam

Total Unsteerable Clients:1

===================================================================================================================

The output of this command includes the following parameters:

Parameter Description
MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network.

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the client that could not be steered to a different AP radio.

Unsteerable Flags

The client is marked unsteerable under specific client steer triggers. These triggers include:

Sticky: A mobile roaming client was staying associated (sticking) to a sub-optimal AP for too long.

Band steer: A dual-bandBand refers to a specified range of frequencies of electromagnetic radiation. capable client was steered toward a 5GHz radio on a dual-bandBand refers to a specified range of frequencies of electromagnetic radiation. AP.

Load Balance: Client match moved the client to a different AP, based upon the load on APs in the client's RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. neighborhood, and the SNRSignal-to-Noise Ratio. SNR is used for comparing the level of a desired signal with the level of background noise. levels the client detected. from each underutilized AP.

IOS: An IOS device is temporarily prevented from steering to avoid blacklisting the ESSExtended Service Set. An ESS is a set of one or more interconnected BSSs that form a single sub network. .

Temporary: A client is temporarily prevented from steering after undergoing a successful bandBand refers to a specified range of frequencies of electromagnetic radiation. steer, then reverting back to a 2.4GHz radio.

HE Steer: HE Steer will not be attempted for the client.

MU Steer: MU Steer will not be attempted for the client

Dot 11v IOS: IOS client has been marked unsteerable for steers.

Rule based: Client has been marked unsteerable by Rules Based Client Match (RBCM).

Voice Roam: Voice roam steer will not be attempted for the client.

Last Steer Time

Timestamp showing the date and time the client match feature failed to associate the client to a different AP radio.

Expiry Time

The amount of time before a client steer attempt expires.

Total steers/successful

The total number of client steer attempts, and the number of successful client steer attempts.

Related Commands

Command

Description

rf arm-profile

This command enables ClientMatch.

show ap arm client-match probe-report

This command displays the client probe report for the specified AP.

show ap arm client-match neighbors

This command displays the BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. of other APs seen by clients in the select AP's RFRadio Frequency. RF refers to the electromagnetic wave frequencies within a range of 3 kHz to 300 GHz, including the frequencies used for communications or Radar signals. neighborhood.

show ap arm virtual-beacon-report

This command displays the virtual beacon report for an AP with a specific IP or MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

show ap arm client-match summary

This command shows the history of AP association changes triggered by the client match feature.

show ap arm client-match history

This command shows the history of AP association changes triggered by the client match feature.

show ap arm client-match restriction-table

This command displays the list of clients that ClientMatch has restricted from the specified AP.

Command History

Command

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/