You are here: Home > CLI Commands > Just_CLI_Topics > show control-plane-security

show control-plane-security

show control-plane-security

Description

Show the current configuration of the control plane security profile.

Syntax

No parameters.

Usage Guidelines

The control plane security profile enables and disables the control plane security feature and identifies campus APsCampus APs are used in private networks where APs connect over private links (LAN, WLAN, WAN or MPLS) and terminate directly on controllers. Campus APs are deployed as part of the indoor campus solution in enterprise office buildings, warehouses, hospitals, universities, and so on. to receive security certificates. Issue this command to view current control plane security settings.

Example

The following command shows the control plane security and auto certificate provisioning features are enabled in the control plane security profile, and that the controller will send certificates to a range of IP addresses:

(host)(config) #show control-plane-security

Control Plane Security Profile

------------------------------

Parameter Value

--------- -----

Control Plane Security Enabled

Auto Cert Provisioning Disabled

Auto Cert Allow All Enabled

Expiry timer(dd:hh) 00:02

Auto Cert Allowed Addresses N/A

Auto Cert Allowed IPv6 Addresses N/A

Related Commands

Command

Description

control-plane-security

Configure the control plane security profile by identifying APs to receive security certificates.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/