You are here: Home > CLI Commands > Just_CLI_Topics > show controller-ipv6

show controller-ipv6

show controller-ipv6

Description

Shows the IPv6 address and VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface ID of the controller.

Syntax

No parameters.

Example

(host) [mynode] # show controller-ipv6

Switch IPv6 Address: 2001::1

Switch IPv6 address is configured to be Vlan Interface: 1501

The output of this command shows the IPv6 address and VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface ID of the controller.

Related Commands

Command

Description

controller-ipv6

sets the default IPv6 address of the to the IPv6 loopback interface address or a specific VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface address.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/