You are here: Home > CLI Commands > Just_CLI_Topics > show country

show country

show country [trail]

Description

Show the country and domain upgrade trail of the controller.

Syntax

Parameter

Description

trail

Display the record showing how the switch was reconfigured for its current country domain when the controller hardware was upgraded.

Usage Guidelines

A controller’s country code sets the regulatory domain for the radio frequencies that the APs use. This value is typically set during the controller’s initial setup procedure. Use this command to determine the country code specified during setup.

Example

The output of this command shows the controller’s country, model and hardware types.

(host) # show country

Country:US

Model:Aruba7240-US

Hardware:Restricted US

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Available in Enable and Config modes on Mobility Master and managed devices.

/*]]>*/