You are here: Home > CLI Commands > Just_CLI_Topics > show crypto-local ipsec-map

show crypto-local ipsec-map

show crypto-local ipsec [tag <ipsec-map-name>]

Description

Displays the current IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. map configuration on the controller.

Syntax

Parameter

Description

tag <ipsec-map-name>

Display a specific IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. map.

Usage Guidelines

The command show crypto-local ipsec displays the current IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. configuration on the controller.

Examples

The command show crypto-local ipsec-map shows the default map configuration along with any specific IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. map configurations.

(host) #show crypto-local ipsec-map

Crypto Map Template "sample" 5

IKE Version: 2

IKEv2 Policy: 20

Security association lifetime seconds : 300

Security association lifetime kilobytes: N/A

PFS (Y/N): N

Transform sets={ default-transform }

Peer gateway: gateway.example.com

Interface: VLAN 0

Source network: 10.4.215.10/255.255.255.255

Destination network: 10.3.75.15/255.255.255.255

Pre-Connect (Y/N): Y

Tunnel Trusted (Y/N): Y

Forced NAT-T (Y/N): N

Uplink Failover (Y/N):N

IP Compression (Y/N):N

Related Commands

Command

Description

crypto-local ipsec-map

Use this command to configure IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. mapping for site-to-site VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two..

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/