You are here: Home > CLI Commands > Just_CLI_Topics > show faults

show faults

show fault [history]

Description

Display a list of faults, which are any problematic conditions of the ArubaOS software or hardware.

Syntax

Parameter

Description

history

Include this parameter to display a history of faults cleared by the managed device or the operator.

Usage Guidelines

A managed device can maintain a list of up to 100 faults. Once 100 faults have been logged, any faults arising after that are dropped. The managed device maintains a history of the last 100 faults that have cleared. Every time a new fault clears clear, the oldest fault in the fault history is purged from the list.

Example

This example below shows all active faults the managed device, including the time the fault occurred, the fault ID number, and a description of the problem.

 

(host) [mynode] (config) #show faults

 

Active Faults

-------------

Time Number Description

---- ------ -----------

2009-03-02 18:13:08 93 Authentication Server vortex is down.

2009-03-02 18:13:08 94 Authentication Server vortex is down.

2009-03-02 18:13:08 95 Authentication Server vortex is down.

2009-03-02 18:13:08 96 Authentication Server vortex is down.

2009-03-02 18:13:08 97 Authentication Server corp1-supersvr is down.

2009-03-02 18:13:08 98 All authentication servers in server group sg-auth2 are brought back in service.

2009-03-02 18:13:08 99 Authentication Server corp1-supersvr is down.

2009-03-02 18:13:08 100 All authentication servers in server group sg-auth2 are brought back in service.

2009-03-02 18:13:08 101 Authentication Server corp1-supersvr is down.

2009-03-02 18:13:08 102 All authentication servers in server group sg-auth2 are brought back in service.

2009-03-02 18:13:08 103 Authentication Server corp1-supersvr is down.

2009-03-02 18:13:08 104 All authentication servers in server group sg-auth2 are brought back in service.

2009-03-02 18:13:08 105 Authentication Server corp1-supersvr is down.

2009-03-02 18:13:08 106 All authentication servers in server group sg-auth2 are brought back in service.

2009-03-02 18:13:09 107 Authentication Server corp1-supersvr is down.

2009-03-02 18:13:09 108 All authentication servers in server group sg-auth2 are brought back in service.

2009-03-02 18:13:09 109 Authentication Server corp1-supersvr is down.

2009-03-02 18:13:09 110 All authentication servers in server group sg-auth2 are brought back in service.

2009-03-02 18:13:09 111 Authentication Server corp1-supersvr is down.

2009-03-02 18:13:09 112 All authentication servers in server group sg-auth2 are brought back in service.

2009-03-02 18:13:09 113 Authentication Server corp1-supersvr is down.

2009-03-02 18:13:09 114 All authentication servers in server group sg-auth2 are brought back in service.

2009-03-02 18:13:09 115 Authentication Server corp1-supersvr is down.

Total number of entries in the queue :23

Related Commands

Command

Description

clear

Manually clear a single fault by specifying the fault ID number, or clear all faults by including the all parameter.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on managed devices.

/*]]>*/