You are here: Home > CLI Commands > Just_CLI_Topics > show ​flush-​r1-​on-​new-​r0

show ​flush-​r1-​on-​new-​r0

ap·​flush-​r1-​on-​new-​r0 {enable|disable}

Description

Use this command to view the status of flushing r1 keys on new r0.

Syntax

No parameters.

Example

The following example displays the status of flushing r1 keys on new r0:

(host) [mynode] (config) #show flush-r1-on-new-r0

Fast Roaming flush-r1-on-new-r0:enable

Related Commands

Command

Description

ap ​flush-​r1-​on-​new-​r0

This command enables or disables flushing of R1 keys, when R0 is updated for d-tunnel or bridge mode.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable mode or Config mode.

/*]]>*/