You are here: Home > CLI Commands > Just_CLI_Topics > show gap-debug

show gap-debug

show gap-debug

Description

Displays the troubleshooting information for the global AP database.

Usage Guidelines

Use this command to identify any issues with the global AP database. This command displays the troubleshooting information for the global AP database.

Example

The following is a sample output of this command:

(host) [mynode] (6000-202) #show gap-debug

GAP Master LMS Table

--------------------

IP Master Cookie Master Seq LMS Cookie LMS Seq Activity Status Msg In Prog Msg Len Attempts Last Reset Reason

-- ------------- ---------- ---------- ------- -------- ------ ----------- ------- -------- -----------------

172.20.1.101 172.20.1.102,521bbce7 0 0.0.0.0,00000000 0 -- up no - - down notification

172.20.1.102 172.20.1.102,521ba3b1 0 0.0.0.0,00000000 0 -- up no - - switched to backup

192.168.2.2 172.20.1.102,521ba5e6 0 192.168.2.2,521ba6fd 170 30 up no - - down notification

192.168.3.2 172.20.1.102,521ba67e 0 192.168.3.2,521ba71b 172 34 up no - - down notification

192.168.4.2 172.20.1.102,521ba6af 0 192.168.4.2,521ba724 163 58 up no - - down notification

192.168.5.2 172.20.1.102,521ba6be 0 192.168.5.2,521ba794 169 19 up no - - down notification

192.168.6.2 172.20.1.102,521ba694 0 192.168.6.2,521ba730 163 40 up no - - down notification

192.168.7.2 172.20.1.102,521ba677 0 192.168.7.2,521ba6fd 170 29 up no - - down notification

The output of this command includes the following information:

Parameter

Description

IP

The IP address of the managed device

Master Cookie

The cookie information on Mobility Master that is used to communicate with the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. .

Master Seq

The sequence number used by Mobility Master to sync up with the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. . This tracks the number of times Mobility Master has communicated with the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. .

LMS Cookies

The cookie information on the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. that is used to communicate with Mobility Master.

LMS Seq

The sequence number used by the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. to sync up with Mobility Master.This tracks the number of times the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. has communicated with Mobility Master.

Activity

The time at which the last activity happened on the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. .

Status

Indicates if the status of the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. is up or down.

Msg in Prog

Indicates if an active communication is happening between the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. andMobility Master. It can be Yes or No. If it is yes, then the Msg Len and Attempt fields are set.

Msg Len

The length of the message that Mobility Master is syncing with the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. .

Attempts

Number of times Mobility Master has attempted to sync with the LMSLocal Management Switch. In multi-controller networks, each controller acts as an LMS and terminates user traffic from the APs, processes, and forwards the traffic to the wired network. .

Last Reset Reason

Indicates the reason for last reset.

Related Commands

Command

Description

ap gap-db

Resynchronize an AP status on a managed device and Mobility Master.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/