You are here: Home > CLI Commands > Just_CLI_Topics > show gsm application

show gsm application

show gsm application <application_name> status

Description

Displays the status of the GSM application, for example, stm, auth, and so on.

Syntax

Parameter

Description

application_name

GSM application name like stm, auth, and so on.

Example

The following is a sample output of this command:

(host) [mynode] (config) #show gsm application stm status

GSM Tick(500 us/tick, gsm_tick=2932440723368, gsm_ticktime=1466220361684074)

Application Histogram:stm

 

+------------------+-----------+--------------+--------------+--------------+--------------+

| Histogram| GSM Thread| GSM Thread| GSM Thread| Main Thread| Main Thread|

|Time Range (in ms)| Cycle Time|API Mutex Wait|API Mutex Hold|API Mutex Wait|API Mutex Hold|

+------------------+-----------+--------------+--------------+--------------+--------------+

| 0.000 .. 0.500| 14| 14| 14| 2477350| 2477266|

| 0.500 .. 1.000| 0| 0| 0| 0| 25|

| 1.0 .. 2.0| 1| 0| 0| 0| 43|

| 2.0 .. 4.0| 0| 0| 0| 0| 14|

| 4.0 .. 8.0| 0| 0| 0| 0| 1|

| 8.0 .. 16.0| 0| 0| 0| 0| 1|

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/