You are here: Home > CLI Commands > Just_CLI_Topics > show iap subnet

show iap subnet

show iap subnet <subnet-name>

Description

Displays the details of specific IAP subnetSubnet is the logical division of an IP network. information.

Syntax

Parameter

Description

subnet <subnet-name>

Displays specific subnetSubnet is the logical division of an IP network. information for an IAP.

Usage Guidelines

The optional output modifiers | begin , | exclude, and | include help you display those lines that begin, include, exclude, respectively, the line expression given in the CLICommand-Line Interface. A console interface with a command line shell that allows users to execute text input as commands and convert these commands to appropriate functions. command. The | redirect-output modifier helps you redirect the command output.

Example

The following command displays a subnetSubnet is the logical division of an IP network. details:

(host) [mynode] (config) #show iap subnet test

Related Commands

Command

Description

hostname

This command changes the hostname of the Mobility Master, standby controller, or managed device.

iap trusted-branch-db

This command is used to configure an Instant AP (IAP)-VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. branch as trusted.

Command History

Release

Modification

ArubaOS 8.2.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system, except for noted parameters.

Enable or Configuration mode on managed devices.

/*]]>*/