You are here: Home > CLI Commands > Just_CLI_Topics > show iap table

show iap table

show iap table

branch-key <brkey>

long

summary

Description

Displays the branch details connected to the managed device.

Syntax

Parameter

Description

branch-key <brkey>

Key for the branch, which is unique to each branch.

long

Displays the branches connected to the managed device in detailed view.

summary

Displays the summary of the IAP table.

Example

This example shows the details of the branches connected to the managed device:

(host) [mynode] (config) #show iap table long

 

IAP Branch Table

----------------

Name VC MAC Address Status Inner IP Assigned Subnet Assigned Vlan

---- -------------- ------ -------- --------------- -------------

Tokyo-CB:D3:16 6c:f3:7f:cc:42:f8 DOWN 0.0.0.0

Paris-CB:D3:16 6c:f3:7f:cc:3d:04 UP 10.15.207.140 10.15.206.99/29 2

LA 6c:f3:7f:cc:42:25 UP 10.15.207.111 10.15.206.24/29 2

Munich d8:c7:c8:cb:d3:16 DOWN 0.0.0.0

London-c0:e1 6c:f3:7f:c0:e1:b1 UP 10.15.207.120 10.15.206.64/29 2

Instant-CB:D3 6c:f3:7f:cc:42:1e DOWN 0.0.0.0

Delhi 6c:f3:7f:cc:42:ca DOWN 0.0.0.0

Singapore 6c:f3:7f:cc:42:cb UP 10.15.207.122 10.15.206.120/29 2

 

Key Bid(Subnet Name)

--- ----------------

b3c65c...

b3c65c...

b3c65c... 2(10.15.205.0-10.15.205.250,5),1(10.15.206.1-10.15.206.252,5)

a2a65c... 0

b3c65c... 7(10.15.205.0-10.15.205.250,5),8(10.15.206.1-10.15.206.252,5)

b3c65c...

b3c65c... 1(10.15.205.0-10.15.205.250,5),2(10.15.206.1-10.15.206.252,5)

b3c65c... 14(10.15.205.0-10.15.205.250,5),15(10.15.206.1-10.15.206.252,5)

The output of this command includes the following parameters:

Parameter

Description

Name

Name of the branch.

VC MAC Address

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the Virtual managed device of the branch.

Status

Current status of the branch (UP or DOWN).

Inner IP

Internal VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. IP of the branch.

Assigned Subnet

SubnetSubnet is the logical division of an IP network. mask assigned to the branch.

Assigned Vlan

VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID assigned to the branch.

Key

Key for the branch, which is unique to each branch.

Bid(Subnet Name)

Branch ID (BID) of the subnetSubnet is the logical division of an IP network..

In the example above, the managed device displays bid-per-subnetSubnet is the logical division of an IP network.-per-branch i.e., for "LA" branch, BID "2" for the ip-range "10.15.205.0-10.15.205.250" with client count per branch "5"). If a branch has multiple subnetsSubnet is the logical division of an IP network., it can have multiple BIDs.

Branches that are in UP state and do not have a Bid(Subnet Name) means that the IAP is connected to a managed device which did not assign any bid for any subnetSubnet is the logical division of an IP network.. In the above example, "Paris-CB:D3:16" branch is UP and does not have a Bid(Subnet Name) information. This means that either the IAP is connected to a backup managed device or connected to a primary managed device without any distributed L2 or L3 subnetsSubnet is the logical division of an IP network..

For more information on bid-per-subnetSubnet is the logical division of an IP network.-per-branch and distributed L2 and L3 subnetsSubnet is the logical division of an IP network., see the DHCP Configuration chapter of the Aruba Instant Access Point 6.2.1.0-3.3 User Guide.

Related Commands

Command

Description

hostname

This command changes the hostname of the Mobility Master, standby controller, or managed device.

iap trusted-branch-db

This command is used to configure an Instant AP (IAP)-VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. branch as trusted.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system, except for noted parameters.

Enable or Configuration mode on managed devices.

/*]]>*/