You are here: Home > CLI Commands > Just_CLI_Topics > show iap trusted-branch-db

show iap trusted-branch-db

show iap trusted-branch-db

Description

Displays the details of IAP trusted branch database information.

Syntax

None

Example

This example shows the details of IAP trusted branch database information:

(host) [mynode] (config) #show iap trusted-branch-db Trusted Branch Validation: Enabled IAP Trusted Branch Table ------------------------ Branch MAC ---------- 01:01:0e:3e:4c:33

 

Another example:

(host) #show iap trusted-branch-db

 

Trusted Branch Validation: Disabled

IAP Trusted Branch Table

------------------------

Branch MAC

----------

(allow all as trusted branch)

 

The output of this command includes the following parameters:

Parameter

Description

Branch MAC

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the trusted IAP branch

Related Commands

Command

Description

hostname

This command changes the hostname of the Mobility Master, standby controller, or managed device.

iap trusted-branch-db

This command is used to configure an Instant AP (IAP)-VPNVirtual Private Network. VPN enables secure access to a corporate network when located remotely. It enables a computer to send and receive data across shared or public networks as if it were directly connected to the private network, while benefiting from the functionality, security, and management policies of the private network. This is done by establishing a virtual point-to-point connection through the use of dedicated connections, encryption, or a combination of the two. branch as trusted.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system, except for noted parameters.

Enable or Configuration mode on managed devices.

/*]]>*/