You are here: Home > CLI Commands > Just_CLI_Topics > show ids profile

show ids profile

show ids profile <profile-name>

Description

Display all ids profiles or display a specific profile name.

Syntax

Parameter

Description

<profile-name>

Name of an IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. profile.

Usage Guidelines

Issue this command without the <profile-name>parameter to display the list of IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. profiles. Include a profile name to display detailed information for that profile.

Examples

The example below shows that the controller has seven configured IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. Profiles.

(host) [mynode] (config) #show ids profile

 

IDS Profile List

----------------

Name References Profile Status

---- ---------- --------------

default 5

test 0

test-tarpit 1

test-wired-lb 0

test1 0

Wizard-test 0

Wizard-test2 0

 

Total:7

In the example above, the Reference column indicates the number of references to the profile named in the Name column. The Profile Status column is blank unless the rule is predefined.

This example displays the configuration settings for the profile test1.

(host) [mynode] (config) #show ids profile test1

 

IDS Profile "test1"

-------------------

Parameter Value

--------- -----

IDS General profile test1

IDS Signature Matching profile test1

IDS DOS profile test1

IDS Impersonation profile test1

IDS Unauthorized Device profile test1

The output of this command includes the following parameters:

Parameter

Description

IDS General profile

Name of a IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. General profile to be applied to an AP or AP group.

IDS Signature Matching profile

Name of a IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. Signature Matching profile to be applied to an AP or AP group.

IDS DOS profile

Name of a IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. DoSDenial of Service. DoS is any type of attack where the attackers send excessive messages to flood traffic and thereby preventing the legitimate users from accessing the service. profile to be applied to an AP or AP group.

IDS Impersonation profile

Name of a IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. Impersonation profile to be applied to an AP or AP group.

IDS Unauthorized Device profile

Name of a IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. Unauthorized Device profile to be applied to an AP or AP group.

Related Commands

Command

Description

ids profile

This command configures the IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. profile .

Command History

Release

Modification

ArubaOS 8.0.0.0

Command Introduced.

Command Information

Platforms

License

Command Mode

All platforms

Requires the RFprotect license.

Config mode on Mobility Master.

/*]]>*/