You are here: Home > CLI Commands > Just_CLI_Topics > show ids rate-thresholds-profile

show ids rate-thresholds-profile

show ids rate-thresholds-profile <profile-name>

Description

Show an IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. Rate Thresholds profile.

Syntax

Parameter

Description

<profile-name>

Name of an IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. Rate Threshold profile.

Usage Guidelines

Issue this command without the <profile-name> parameter to display the IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. Rate Threshold profile list. Include a profile name to display detailed configuration information for that profile.

Examples

The example below shows that the controller has three configured IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. Rate Threshold profiles.

(host) [mynode] (config) #show ids rate-thresholds-profile

 

IDS Rate Thresholds Profile List

--------------------------------

Name References Profile Status

---- ---------- --------------

default 20

probe-request-response-thresholds 10 Predefined

test 0

 

Total:3

In the example above, the Reference column indicates the number of references to the profile named in the Name column. The Profile Status column is blank unless the rule is predefined.

This example displays the configuration settings for the profile test.\

(host) [mynode] (config) #show ids rate-thresholds-profile test

 

IDS Rate Thresholds Profile "test"

----------------------------------

Parameter Value

--------- -----

Channel Increase Time 15 sec

Channel Quiet Time 900 sec

Channel Threshold 300

Node Time Interval 15 sec

Node Quiet Time 900 sec

Node Threshold 200

The output of this command includes the following parameters:.

Parameter

Description

Channel Increase Time

Time, in seconds, in which the threshold must be

exceeded in order to trigger an alarm.

Channel Quiet Time

The time that must elapse after a channel rate alarm before another identical alarm may be triggered. This option prevents excessive messages in the log file.

Channel Threshold

Number of a specific type of frame that must be exceeded within a specific interval in an entire channel to trigger an alarm.

Node Time Interval

Time, in seconds, in which the threshold must be exceeded in order to trigger an alarm.

Node Quiet Time

The time that must elapse after a node rate alarm before another identical alarm may be triggered. This option prevents excessive messages in the log file.

Node Threshold

Number of a specific type of frame that must be exceeded within a specific interval for a particular client MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address to trigger an alarm.

Related Commands

Command

Description

ids rate-thresholds-profile

This command configures the IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. Rate Threshold profile.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command Introduced.

Command Information

Platforms

License

Command Mode

All platforms

Requires the RFprotect license.

Config mode on Mobility Master.

/*]]>*/