You are here: Home > CLI Commands > Just_CLI_Topics > show ids wms-local-system-profile

show ids wms-local-system-profile

ids wms-local-system-profile

max-ap-threshold <max-ap-threshold>

Description

Display statistics for the WMS local system profile settings.

Syntax

No Parameters

Usage Guidelines

The configuration parameters in IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. WMS local system profile enables local termination of the WMS service, sets maximum thresholds for the maximum number of managed APs and stations, and defines the intervals at which valid AP, rogue AP and station data is sent to the managed device. Issue this command to view the local WMS service profile settings .

Example

The following commands first set the interval time for repopulating the MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. table to 10 minutes and then sets the maximimum number of APs to 100.

(host) (config) #show ids wms-local-system-profile

IDS WMS Local System Profile

----------------------------

Parameter Value Set

--------- ----- ---

Max AP Threshold 100

Max STA Threshold 0

Max RBTree Entries 3

Max System Wired MACs 1000

Override Service Termination false

Periodic AP Snapshot Interval 180 minutes

Periodic Rogue AP Snapshot Interval 30 minutes

Periodic STA Snapshot Interval 180 minutes

System Wired MAC Update Interval 8

The output of this command includes the following information:

Table 1: IDS WMS Local System Profile Settings

Parameter

Description

Max AP Threshold

The max threshold for the total number of APs

Max STA Threshold

The max threshold for the total number of stations.

Max RBTree Entries

The max threshold for the total number of AP and station RBTree entries.

Max System Wired MACs

The max number of system wired MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. table entries learned by the managed device.

Override Service Termination

If enabled, this feature overrides the system-determined termination mode, and terminates WMS service at the managed device to which the AP is associated.

Periodic AP Snapshot Interval

The interval in minutes at which to generate a periodic snapshot of monitored APs. The (AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities.) messages comprising the snapshot will be spread over this interval.

Periodic Rogue AP Snapshot Interval

The interval in minutes at which to generate a periodic snapshot of monitored Rogue APs. The (AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities.) messages comprising the snapshot will be spread over this interval.

Periodic STA Snapshot Interval

The interval in minutes at which to generate a periodic snapshot of monitored clients. The (AMONAdvanced Monitoring. AMON is used in Aruba WLAN deployments for improved network management, monitoring and diagnostic capabilities.) messages comprising the snapshot will be spread over this interval.

System Wired MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. Update Interval

The interval, in minutes, for repopulating the system wired MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. table at the managed device.

Related Commands

Release

Modification

mgmt-server

Configures the management server profile.

ids management-profile

Manage the events correlation for IDSIntrusion Detection System. IDS monitors a network or systems for malicious activity or policy violations and reports its findings to the management system deployed in the network. event traps and syslogs (logs).

ids wms-local-system-profile

This command configures the WMS service to terminate on individual managed devices instead of Mobility Master.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/