You are here: Home > CLI Commands > Just_CLI_Topics > show image version

show image version

show image version

type

Description

Display the current system image version on both partition 0 and 1.

Syntax

Parameter

Description

type

Displays the System image type.

Example

The following example shows that the managed device is running ArubaOS 8.0 and booting off partition 0:1.

(host)[mynode] #show image version

----------------------------------

Partition : 0:0 (/mnt/disk1)

Software Version : ArubaOS 8.0.0.0-svcs-ctrl (Digitally Signed - Developer/Internal Build)

Build number : 0000

Label : ssetty@ss_sc_new-ENG.0000

Built on : Wed Jun 8 14:46:22 IST 2016

----------------------------------

Partition : 0:1 (/mnt/disk2) **Default boot**

Software Version : ArubaOS 8.0.0.0-svcs-ctrl (Digitally Signed - Developer/Internal Build)

Build number : 0000

Label : ssetty@ss_sc_new-ENG.0000

Built on : Thu Jun 16 12:53:57 IST 2016

The output of this command includes the following parameters:

Parameter

Description

Partition

Partition number and name. The default boot partition will display a **Default boot** notice by the partition name.

Software Version

Version of ArubaOS software running on the partition.

Build number

Build number for the software version.

Label

The label parameter can display additional information for the build. By default, this value is the software build number.

Built on

Date the software build was created.

Following is an example of show image version type command:

(host) [mynode] #show image version type

 

This image is development build

Related Commands

Command

Description

show ap image-preload status

This command displays the list of APs that will preload a new version of software from a controller with the AP preload feature activated.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable and Config mode on Mobility Master.

/*]]>*/