You are here: Home > CLI Commands > Just_CLI_Topics > show interface port-channel

show interface port-channel

show interface port-channel <id>

access-group

counters

switchport

trusted-vlan

untusted-vlan

xsec

xsec point-to-point

Description

Displays information about a specified port-channel interface.

Syntax

Parameter

Description

access-group

Displays access groups configured on this interface.

counters

Displays L2 interface counters for the specified interface.

switchport

Displays L2 interface information for the specified interface.

trusted-vlanVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN.

Displays port member vlanVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. trusted status.

untrusted-vlan

Displays port member vlanVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. untrusted status.

xsec

Displays xsec configuration.

xsec point-to-point

Displays the point-to-point xsec tunnels for the specified interface.

Example

The example below shows the output of show interface port-channel 7 on a managed device.

(host) [mynode] (config) #show interface port-channel 7

Port-Channel 7 is administratively up, Link is up, Line protocol is down

Hardware is Port-Channel, address is 00:0C:29:37:AB:81 (bia 00:0C:29:37:AB:81)

Description: Link Aggregate

Spanning Tree is Discarding

Switchport priority: 0

Member port(s):

Speed :0 Mbps

Interface index: 8200

MTU: 1500 bytes

Last clearing of "show interface" counters 0 day 8 hr 48 min 3 sec

link status last changed 0 day 8 hr 48 min 3 sec

0 packets input, 0 bytes

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input error bytes, 0 CRC, 0 frame

0 multicast, 0 unicast

0 packets output, 0 bytes

0 output errors bytes, 0 deferred

0 collisions, 0 late collisions, 0 throttles

Port-Channel 7 is NOT TRUSTED

The output of this command includes the following parameters:

Parameter

Description

Port-Channel 7 is...

Status of the specified port.

line protocol is...

Status of the line protocol on the specified port.

Hardware is....

Hardware interface type.

address is...

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the hardware interface.

Description

The port type, name, and connector type. If the LAGLink Aggregation Group . A LAG combines a number of physical ports together to make a single high-bandwidth data path. LAGs can connect two switches to provide a higher-bandwidth connection to a public network. is created by LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes., it is indicated as shown in the display output above. If the LAGLink Aggregation Group . A LAG combines a number of physical ports together to make a single high-bandwidth data path. LAGs can connect two switches to provide a higher-bandwidth connection to a public network. is created by LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes., you can not statically add or delete any ports under that port channel. All other commands are allowed. If LACPLink Aggregation Control Protocol. LACP is used for the collective handling of multiple physical ports that can be seen as a single channel for network traffic purposes. is not shown, then the LAGLink Aggregation Group . A LAG combines a number of physical ports together to make a single high-bandwidth data path. LAGs can connect two switches to provide a higher-bandwidth connection to a public network. is created by static configuration.

Spanning Tree is...

Spanning tree status on the specified port-channel.

VLAN membership

Number of VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. the specified port-channel is associated with.

Switchport priority

Switchport priority of the specified port-channel.

Jumbo Support is...

Displays the status of jumbo frame on a port channel.

Last clearing of “show interface counters”

Time since “show interface counters” was cleared.

 

Below the time, all current counters related to the specified port are listed.

Port-channel 7 is...

Whether or not this port-channel is trusted.

#show interface port-channel 7 access-group

 

Port-Channel 7:

 

Port-Vlan Session ACL

---------------------

SessionACL Vlan Status

---------- ---- ------

 

The output of this command includes the following parameters:

Parameter

Description

SessionACL

Session ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. name.

Vlan

VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. number.

Status

ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. status.

#show interface port-channel 7 counters

Port InOctets InUcastPkts InMcastPkts InBcastPkts

PC 0: 0 0 0 0

Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts

PC 0: 0 0 0 0

 

The output of this command includes the following parameters:

Parameter

Description

PC

Port number.

InOctets

Number of octets received through the port.

InUcastPkts

Number of unicast packets received through the port.

InMcastPkts

Number of multicast packets received through the port.

InBcastPkts

Number of broadcast packets received through the port.

OutOctets

Number of octets sent through the port.

OutUcastPkts

Number of unicast packets sent through the port.

OutMcastPkts

Number of multicast packets sent through the port.

OutBcastPkts

Number of broadcast packets sent through the port.

#show interface port-channel 7 trusted-vlan

 

Name: Port-channel 7

Switchport: Enabled

Administrative mode: static access

Operational mode: static access

Administrative Trunking Encapsulation: dot1q

Operational Trunking Encapsulation: dot1q

Access Mode VLAN: 1 (Default)

Trunking Native Mode VLAN: 1 (Default)

Trunking Vlans Enabled: NONE

Trunking Vlans Active: NONE

The output of this command includes the following parameters:

Parameter

Description

Name

Port name.

Switchport

Whether or not switchport is enabled.

Administrative mode

Administrative mode .

Operational mode

Operational mode.

Administrative Trunking Encapsulation

Encapsulation method used for administrative trunking.

Operational Trunking Encapsulation

Encapsulation method used for operational trunking.

Access Mode VLAN

The access mode VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. for the specified port.

Trunking Native Mode VLAN

The trunking native mode VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. for the specified port.

Trunking Vlans Enabled

Number of trunking VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. currently enabled.

Trunking Vlans Active

Number of trunking VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. currently active.

#show interface port-channel 7 trusted-vlan

 

Name: Port-Channel7

Trusted Vlan(s)

The output of this command includes the following parameters:

Parameter

Description

Name

Name of the specified port.

trusted Vlan(s)

List of trusted VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

#show interface port-channel 7 untrusted-vlan

 

Name: FE1/0

Untrusted Vlan(s)

 

The output of this command includes the following parameters:

Parameter

Description

Name

Name of the specified port.

Untrusted Vlan(s)

List of untrusted VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

#show interface port-channel 7 xsec

 

xsec vlan 7 is ACTIVE

The output of this command includes the following parameters:

Parameter

Description

xsec vlan 7 is ACTIVE

This states that xsec is active on the specified port as well as the associated VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

Related Commands

Command

Description

interface mgmt

This command configures the out-of-bandBand refers to a specified range of frequencies of electromagnetic radiation. EthernetEthernet is a network protocol for data transmission over LAN. management port on controller.

interface port-channel

This command configures an EthernetEthernet is a network protocol for data transmission over LAN. port channel.

interface range

This command configures a range of GigabitEthernet interfaces on the managed device.

interface tunnel

This command configures a Layer-2 or Layer-3 GREGeneric Routing Encapsulation. GRE is an IP encapsulation protocol that is used to transport packets over a network. tunnel between a managed device and another GREGeneric Routing Encapsulation. GRE is an IP encapsulation protocol that is used to transport packets over a network.-capable device.

interface vlan

This command configures a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface.

interface vlan ip igmp

This command enables IGMPInternet Group Management Protocol. Communications protocol used by hosts and adjacent routers on IP networks to establish multicast group memberships. or IGMP snoopingIGMP snooping prevents multicast flooding on Layer 2 network by treating multicast traffic as broadcast traffic. Without IGMP snooping, all streams could be flooded to all ports on that VLAN. When multicast flooding occurs, end-hosts that happen to be in the same VLAN would receive all the streams only to be discarded without snooping. on this interface, or configures a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface for uninterrupted streaming of multicast traffic.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or config mode on Mobility Master.

/*]]>*/