You are here: Home > CLI Commands > Just_CLI_Topics > show interface-profile voip-profile

show interface-profile voip-profile

show interface-profile voip-profile <profile-name>

Description

This command displays the specified VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. profile configuration information.

Syntax

Parameter

Description

<profile-name>

Name of the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. profile.

Examples

The following example shows configuration details for the VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. profile:

(host) #show interface-profile voip-profile profile1

VOIP profile "profile1"

-----------------------

Parameter Value

--------- -----

VOIP VLAN 1

DSCP 0

802.1 UP 0

VOIP Mode auto-discover

The output of this command includes the following information:

Parameter

Description

VOIP VLAN

The Voice VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID.

DSCP

The DSCPDifferentiated Services Code Point. DSCP is a 6-bit packet header value used for traffic classification and priority assignment. value for the voice VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

802.1 UP

The 802.11p priority level.

VOIP Mode

The mode of VoIPVoice over IP. VoIP allows transmission of voice and multimedia content over an IP network. operation. It can be auto-discover or static.

Related Commands

Command

Description

interface mgmt

This command configures the out-of-bandBand refers to a specified range of frequencies of electromagnetic radiation. EthernetEthernet is a network protocol for data transmission over LAN. management port on controller.

interface range

This command configures a range of GigabitEthernet interfaces on the managed device.

interface tunnel

This command configures a Layer-2 or Layer-3 GREGeneric Routing Encapsulation. GRE is an IP encapsulation protocol that is used to transport packets over a network. tunnel between a managed device and another GREGeneric Routing Encapsulation. GRE is an IP encapsulation protocol that is used to transport packets over a network.-capable device.

interface vlan

This command configures a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface.

interface vlan ip igmp

This command enables IGMPInternet Group Management Protocol. Communications protocol used by hosts and adjacent routers on IP networks to establish multicast group memberships. or IGMP snoopingIGMP snooping prevents multicast flooding on Layer 2 network by treating multicast traffic as broadcast traffic. Without IGMP snooping, all streams could be flooded to all ports on that VLAN. When multicast flooding occurs, end-hosts that happen to be in the same VLAN would receive all the streams only to be discarded without snooping. on this interface, or configures a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. interface for uninterrupted streaming of multicast traffic.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Config or Enable mode on Mobility Master.

/*]]>*/