You are here: Home > CLI Commands > Just_CLI_Topics > show inventory

show inventory

show inventory

Description

This command displays the hardware inventory of Mobility Master or the managed device.

Syntax

No parameters.

Example

Execute this command to display the hardware component inventory of Mobility Master.

(host) [mynode] #show inventory

 

Mgmt Port HW MAC Addr : 00:0C:29:71:10:0B

HW MAC Addr : 00:0C:29:71:10:15

System Serial# : DC0604083

Activate license : Not applicable

Supported device type : MM

Active device type : MM

Issue this command to display the hardware component inventory of the managed device. The output of this command will vary depending on the controller platform type.

(host-md) #show inventory

 

Supervisor Card slot : 0

System Serial# : BA0009743 (Date:12/26/14)

CPU Card Serial# : AE51038711 (Date:12/25/14)

CPU Card Assembly# : 2010216H

CPU Card Revision : (Rev:01.00)

Interface Card Serial# : AE51031572 (Date:12/25/14)

Interface Card Assembly# : 2010085E

Interface Card Revision : (Rev:04.00)

SC Model# : Aruba7210

HW MAC Addr : 00:1a:1e:01:b2:28 to 00:1a:1e:01:b2:2f

CPLD Version : (Rev: 1.4)

Power Supply 0 : Present : No

Power Supply 1 : Present : Yes

: 12V OK : Yes

: Fan OK : Yes

: Aruba Model No : 2510057

: Vendor & Model No : QCS DCJ3501-01P

: Serial No : QCS142320YU

: MFG Date : 6/5/14

: Output 1 Config : 12V 350W

: Input Min : 90V AC

: Input Max : 264V AC

Main Board Temperatures :

: U24 - Local Temp 30 C (shadow of XLP heatsink)

: Q1 - Remote 1 Temp 34 C (shadow of VRM, VDD_CPU)

: Q2 - Remote 2 Temp 33 C (shadow of VRM, VDD_SOC)

: U44 - Local Temp 25 C (shadow of DPI connector)

: U29 - Remote 1 Temp 31 C (XLP die temperature)

: Q36 - Remote 2 Temp 28 C (shadow of 98X1422)

: J2 - DDR A Temp 24 C (DDR3 A temp)

: J4 - DDR B Temp 26 C (DDR3 B temp)

: J1 - DDR C Temp 25 C (DDR3 C temp)

: J3 - DDR D Temp 27 C (DDR3 D temp)

: Port 0 Temp 148 C (1G PHY temp)

: Port 1 Temp 148 C (1G PHY temp)

Interface Board Temperatures :

: U21 - Local Temp 27 C (shadow of port 1 RJ45)

: Q4 - Remote 1 Temp 28 C (shadow of 88E1543)

: Q3 - Remote 2 Temp 34 C (shadow of 88X2140)

Fan 0 : 8916 rpm (5.495 V),Speed Low

Fan 1 : 9029 rpm (5.495 V),Speed Low

Fan 2 : 9029 rpm (5.450 V),Speed Low

Fan 3 : 8998 rpm (5.630 V),Speed Low

Main Board Voltages :

ispPAC_POWR1014A_A :

: 1V2 1.20V sense 1.232 V

: VDD SOC 0.937V sense 0.918 V

: VCC IOBD 1V5 1.50V sense 1.528 V

: DDR3BD_VTT 0.75V sense 0.750 V

: VCC 1A 1.00V sense 1.024 V

: IV8_DIGITAL 1.80V sense 1.848 V

: 3V3_MAIN 3.30V sense 3.366 V

: VCC1 1.00V sense 1.018 V

: VCC25 2.50V sense 2.556 V

: 3V3 SB 3.30V sense 3.360 V

ispPAC_POWR1014A_B :

: VDD 0.806V sense 0.786 V

: VCC IOAC 1V5 1.50V sense 1.528 V

: DDR3AC_VTT 0.75V sense 0.752 V

: VDD_SRAM 1.00V sense 1.042 V

: VCC1B 1.00V sense 1.030 V

: 1V8_ANALOG 1.80V sense 1.854 V

: 1V8 1.80V sense 1.866 V

: VDDIO12_XAUI 1.20V sense 1.224 V

: 5V 5.00V sense 5.016 V

Interface Board Voltages :

ispPAC_POWR6AT6 :

: VCC33 3.30V sense 3.366 V

: VCC 18 1.80V sense 1.856 V

: VCC1 1.00V sense 1.026 V

: VCC12 1.20V sense 1.224 V

: VCC12-DVDD 1.20V sense 1.212 V

: VCC9 0.90V sense 0.928 V

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master and Enable mode on Managed Device.

/*]]>*/