You are here: Home > CLI Commands > Just_CLI_Topics > show ip access-group

show ip access-group

show ip access-group

Description

Displays ACLsAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. configured for each port on Mobility Master.

Syntax

No parameters.

Examples

The example below shows part of the output of this command. If a port does not have a defined session ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port., the Port-Vlan Session ACL table will be blank.

(host) [mynode] #show ip access-group

 

FE 1/0:

Rx access list 200 is applied

session access list User14 is applied

 

Port-Vlan Session ACL

---------------------

SessionACL Vlan Status

---------- ---- ------

coltrane 22 configured

 

The output of this command includes the following parameters:

Parameter

Description

Session ACL

Name of the ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. applied to the interface.

VLAN

If the ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. was applied to a VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. associated with this port, this column will show the VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID.

Status

Shows whether or not the session ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. is configured.

Related Commands

Command

Description

ip access-group

Configures an access group for an interface.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/