You are here: Home > CLI Commands > Just_CLI_Topics > show ip-flow-export

show ip-flow-export

show ip-flow-export

collector [<ipaddr>]

gsm-cache

Description

This command shows information for IP flow collector and the GSM cache.

Syntax

Parameter

Description

collector [<ipaddr>]

Specify the IP address of the collector.

gsm-cache

Shows GSM cache.

Example

The following command displays information about the IP flow collector.

(host) [mynode] #ip-flow-export collector

 

Observation Domain: 168096376 (Controller IP)

Collector IP Not Configured, protocol udp, port 4739, not enabled, not connected

Upload template always, upload all sessions every 15 minute(s), no upload flow cache snapshot

15000 flow cache size, 0 flows exported, next sequence 0, 0 packets, 0 bytes

Last template send: Never, last dispatch: Never

0 Connect errors, 0 connection resets, 0 send errors, 0 flows dropped, 0 blocked sends

(RJ_LC120) #show ip-flow-export collector 1.1.1.1

Observation Domain: 168096376 (Controller IP)

Collector IP 1.1.1.1, protocol udp, port 4739, not enabled, not connected

Upload template always, upload all sessions every 15 minute(s), no upload flow cache snapshot

15000 flow cache size, 0 flows exported, next sequence 0, 0 packets, 0 bytes

Last template send: Never, last dispatch: Never

0 Connect errors, 0 connection resets, 0 send errors, 0 flows dropped, 0 blocked sends

No flows

Related Commands

Command

Description

ip dhcp pool

This command configures the IP flow collector profile. This command should be configured under /md.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/