You are here: Home > CLI Commands > Just_CLI_Topics > show ip mobile

show ip mobile

show ip mobile

act

active-domains

binding [<host-ip>|<host-ipv6>|<host-macaddr>|brief]

domain [<name>]

global

hat

host [<host-ip>|<host-ipv6>|<host-macaddr>|brief]

multicast-vlan-table [client-macaddr]

packet-trace [<count>]

remote <host-ip>|<host-ipv6>|<host-macaddr>

trace <host-ip>|<host-ipv6>|<mac-addr>|{force <host-ip>|<host-ipv6>|<mac-addr>}

traffic dropped|foreign-agent|home-agent|proxy

trail <host-ip>|<host-ipv6><host-macaddr>

tunnel

visitor [<host-ip>|<host-ipv6>|<host-macaddr>|brief]

 

Description

This command displays statistics and configuration information for the mobile protocol.

Syntax

Parameter

Description

act

Active anchor managed device table; subnetsSubnet is the logical division of an IP network. to another managed device map.

active domains

IP mobility domains active on this switch

binding

Display a list of Home Agent Bindings

[<host-ip>]

Filter the Home Agent Bindings list to display data for a specific host IPv4 address.

[<host-ipv6>]

Filter the Home Agent Bindings list to display data for a specific host IPv6 address.

[<host-macaddr>]

Filter the Home Agent Bindings list to display data for a specific host MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

[brief]

Limit the output of this command to show just two lines of data.

domain [<name>]

Display subnetSubnet is the logical division of an IP network., VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN., and home agent information for all mobility domains, or specify a mobility domain name to view data for that domain only.

global

View the current Mobility Agents global configuration

hat

Display the active Home Agent table

host

Display a list of Mobile IP hosts.

[<host-ip>]

Filter the Mobile Host List to display data for a specific host IPv4 address.

[<host-ipv6>]

Filter the Mobile Host List to display data for a specific host IPv6 address.

[<host-macaddr>]

Filter the Mobile Host List to display data for a specific host MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

[brief]

Limit the output of this command to show just two lines of data.

multicast-vlan-table

Displays mobility multicast VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. table information.

mac

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address of the client.

packet-trace [<count>]

The output of this command shows when packets of different types were sent between a source IP or MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address and a destination IP or MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

remote <host-ip>| <host-ipv6>|<host-macaddr>

This is a debug command can be used to identify the managed device associated with the specified client IPv4 or IPv6 address or MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address. The output of this command shows the home agent (HA) and foreign agent (FA) for a mobile client, as well as the client's roaming status.

trace

Show if the Mobile IP feature will poll remote managed device for mobility status of station.

<host-ip>

Host IPv4 address.

<host-ipv6>

Host IPv6 address.

<mac-addr>

Host MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address

force <host-ip>| <host-ipv6>|<mac-addr>

Show if the Mobile IP feature will poll remote managed device for mobility status of station.

traffic

Display mobile IP protocol statistics for:

Proxy Mobile IP

Home Agent Registrations

Foreign Agent Registrations

Registration Revocations

dropped

Show only counters for dropped mobility traffic.

foreign-agent

Show only mobile IP foreign agent statistics.

A foreign agent is the managed device which handles all mobile IP communication with a home agent on behalf of a roaming client.

home-agent

Show only mobile IP home agent statistics.

A home agent for a mobile client is the managed device where the client first appears when it joins the mobility domain.

proxy

Show only counters for mobile IP proxy traffic.

trail <host-ip>| <host-ipv6>|<host-macaddr>

Show the mobile IP roaming trail by entering a host’s IP (IPv4 or IPv6)or MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

tunnel

Show the Mobile Tunnel Table for IPIP tunnels.

visitor

Display a list of mobile nodes visiting a foreign agent.

[<host-ip>]

Filter the Foreign Agent Visitor list to display data for a specific host IPv4 address.

[<host-ipv6>]

Filter the Foreign Agent Visitor list to display data for a specific host IPv6 address.

[<host-macaddr>]

Filter the Foreign Agent Visitor list to display data for a specific host MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

[brief]

Limit the output of this command to show just two lines of data.

Examples

The example below lists mobility domains configured on the managed device, and shows information for any subnetsSubnet is the logical division of an IP network. defined on these domains.

(host) [mynode] #show ip mobile domain

 

Mobility Domains:, 2 domain(s)

------------------------------

 

Domain name default

Home Agent Table, 0 subnet(s)

 

Domain name newdomain

Home Agent Table, 2 subnet(s)

subnet mask VlanId Home Agent Description

--------------- --------------- ------ --------------- -----------------------

10.2.124.76 255.255.255.255 1 10.4.62.2 Corporate mobility entry

172.21.5.50 255.255.255.255 1 10.4.62.2 Reserved entries

The output of this command includes the following parameters:

Parameter

Description

Home Agent

IP address of the home agent or mobility agent.

Description

Description of the HAT entry.

Use the show ip mobile host command to track mobile users.

(host) [mynode] #show ip mobile host

 

Mobile Host List, 1 host(s)

---------------------------

9c:b7:0d:3f:a6:dd 10.16.23.219 mob1

IPv4: 10.16.23.219

IPv6: fe80::826:aa9a:fe35:53e0

2004:deed::34

Roaming Status: Home Switch/Home VLAN, Service time 0 days 01:34:19

Home VLAN 623 on network 10.16.23.0/24

DHCP lease for PC at Sun Dec 23 20:32:00 2012 for 86400 secs from 10.16.28.1

The output of this command includes the following parameters:

Parameter

Description

<mac-addr> <ip-addr>

MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. and IP addresses of the host

Roaming Status

Displays how long the host has used its current managed device and VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

Home VLAN

VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. ID, IP address and subnetSubnet is the logical division of an IP network. of the home VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN..

DHCP lease

Displays the amount of time the station has had its current DHCPDynamic Host Configuration Protocol. A network protocol that enables a server to automatically assign an IP address to an IP-enabled device from a defined range of numbers configured for a given network.  lease.

Related Commands

Command

Description

ip mobile active-domain

This command configures the mobility domain that is active on the managed device.

ip mobile domain

This command configures the mobility domain on the managed device.

ip mobile foreign-agent

This command configures the foreign agent for IP mobility.

ip mobile home-agent

This command configures the home agent for IP mobility.

ip mobile proxy

This command configures the proxy mobile IP module in a mobility-enabled managed device.

ip mobile revocation

This command configures the frequency at which registration revocation messages are sent.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/