You are here: Home > CLI Commands > Just_CLI_Topics > show ip nat pool

show ip nat pool

show ip nat pool

Description

This command displays a pool of IP addresses for NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device..

Syntax

No parameters.

Examples

The example below shows the current NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. pool configuration on Mobility Master.

(host) [mynode]# show ip nat pools

 

NAT Pools

---------

Name Start IP    End IP DNAT IP Flags

---- --------    --------- ------- -----

2net 192.0.2.2 192.0.2.48 192.0.2.222

The output of this command includes the following parameters:

Parameter

Description

Name

Name of the NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. pool.

Start IP

IP address that defines the beginning of the range of source NATSource NAT changes the source address of the packets passing through the router. Source NAT is typically used when an internal (private) host initiates a session to an external (public) host. addresses in the pool.

End IP

IP address that defines the end of the range of source NATSource NAT changes the source address of the packets passing through the router. Source NAT is typically used when an internal (private) host initiates a session to an external (public) host. addresses in the pool.

DNAT IP

Destination NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. IP address, if defined.

Flags

NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device. pool flags, if any.

Related Commands

Command

Description

ip nat

This command configures a pool of IP addresses for NATNetwork Address Translation. NAT is a method of remapping one IP address space into another by modifying network address information in Internet Protocol (IP) datagram packet headers while they are in transit across a traffic routing device..

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

PEFNGPolicy Enforcement Firewall. PEF also known as PEFNG provides context-based controls to enforce application-layer security and prioritization. The customers using Aruba mobility controllers can avail PEF features and services by obtaining a PEF license. PEF for VPN users—Customers with PEF for VPN license can apply firewall policies to the user traffic routed to a controller through a VPN tunnel. license.

Enable or Config mode on Mobility Master.

/*]]>*/