You are here: Home > CLI Commands > Just_CLI_Topics > show ip nexthop-list

show ip nexthop-list

show ip nexthop-list

details STRING

STRING

Description

This command displays the next hop list settings for policy-based routing.

Syntax

Parameter

Description

details

Displays detailed next hop settings for policy-based routing.

STRING

Displays the next hop settings based on the next hop list name.

Usage Guidelines

A next hop IP is the IP address of a adjacent router or device with layer-2 connectivity to managed device. The next hop list provides redundancy for the next hop devices by forwarding the traffic to a backup next hop device in case of failures. If active next hop device on the list becomes unreachable, traffic matching a policy-based routing ACLAccess Control List. ACL is a common way of restricting certain types of traffic on a physical port. is forwarded using the highest-priority active next hop on the list. For more information on this feature, see ip nexthop-list.

Example

The following command displays the configuration settings for the one configured next hop list.

(host) [mynode] #show ip nexthop-list

 

Nexthop-List Entries

--------------------

Name Type Dest Preemptive Failover Nexthop

---- ---- ---- ------------------- -------

load-balance-gateways Active-Active Enabled

load-balance-ipsecs Active-Active Enabled

traditional-ipsecs Active-Standby Enabled

 

Nexthop Dest Nexthop Priority

------------ ----------------

10.18.2.254(2), 10.10.10.254(1)

 

The output of this command displays the following information

Parameter

Description

Name

Name of the next hop list

Type

Type of next hop.

Dest

Destination prefix address.

Preemptive Failover

This column indicates whether preemptive failover is enabled or disabled.

If preemption is enabled and a higher priority next hop becomes reachable again, packets are again forwarded to the higher priority next hop.

Nexthop

Next hop IP address.

Nexthop Dest

Next hop destination prefix address.

Nexthop Priority

List of the IP addresses of all next hop IPs, including the priority assigned to each device when the list was configured.

Related Commands

Command

Description

ip route

This command configures a static route on Mobility Master. (These routes can use a next hop list.)

ip nexthop-list

Configure next hop list settings for policy-based routing.

Command History

Version

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/