You are here: Home > CLI Commands > Just_CLI_Topics > show ip probe

show ip probe

show ip probe

Description

This command displays the health-check profile settings for measuring WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. reachability and latency on a managed device uplink, and the default probe profile settings for PBRPolicy-based Routing. PBR provides a flexible mechanism for forwarding data packets based on polices configured by a network administrator. using next-hop lists.

Syntax

No parameters.

Usage Guidelines

The health-check feature uses ping or UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. probes for measuring WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. reachability and latency. PBRPolicy-based Routing. PBR provides a flexible mechanism for forwarding data packets based on polices configured by a network administrator. routing uses ping probes to determine the reachability of devices on a next-hop list. This command should be executed from the managed device only.

Examples

The following command displays the current IP probe settings for the default and health-check IP probe profiles.

(host-md) #show ip probe

 

IP Probe Entries

----------------

Name Probe Mode Frequency(in sec) Retries Burst size

---- ---------- ----------------- ------- ----------

default Ping 10 19 3

health-check Ping 10 3 5

The output of this command contains the following information:

Column

Description

Name

Name of the ip probe profile, which is either default or health-check.

Probe Mode

Indicates whether the probes are sent as ping or UDPUser Datagram Protocol. UDP is a part of the TCP/IP family of protocols used for data transfer. UDP is typically used for streaming media. UDP is a stateless protocol, which means it does not acknowledge that the packets being sent have been received. packets.

Frequency

Probe interval, in seconds. The managed device sends the number of probes in the Burst Size column during each frequency interval.

Retries

Number of times the managed device attempts to resend a probe.

Burst size

Number of probes sent during the probe frequency interval that appears in the Frequency column.

Related Commands

Command

Description

ip probe default

This command configures IP probes for PBRPolicy-based Routing. PBR provides a flexible mechanism for forwarding data packets based on polices configured by a network administrator. using a next-hop list.

ip probe health-check

This command configures WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. health-check ping-probes for measuring WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. availability and latency on managed device uplinks.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platform

License

Command Mode

All platforms

Base operating system.

Enable mode on Managed Device.

/*]]>*/