You are here: Home > CLI Commands > Just_CLI_Topics > show ip radius

show ip radius

show ip radius

nas-ip

source-interface

Description

This command displays global parameters for configured RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  servers.

Syntax

Command

Description

nas-ip

Show the Network Access Server (NASNetwork Access Server. NAS provides network access to users, such as a wireless AP, network switch, or dial-in terminal server. ) IP address attribute sent in outgoing RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  requests.

source-interface

Show the source interface address of outgoing RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  requests.

Examples

The following example displays the RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  client NASNetwork Access Server. NAS provides network access to users, such as a wireless AP, network switch, or dial-in terminal server. IP address:

(host) [mynode] #show ip radius nas-ip

RADIUS client NAS IP address = 10.168.254.221

RADIUS client NAS IPv6 address = ::1

The following example displays the RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  client source interface address of the outgoing RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  requests:

(host) [mynode] #show ip radius source-interface

Global radius client source IP address = 12.0.2.26, vlan 3

Global radius client source IPv6 address = ::, vlan 0

Per-server client source IPv4/6 addresses:

Related Commands

Command

Description

ip radius

Configures global parameters for configured RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  servers.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/