You are here: Home > CLI Commands > Just_CLI_Topics > show ip route

show ip route

show ip route

counters

static

stats

Description

This command displays the Mobility Master routing table.

Syntax

Command

Description

counters

Displays the number of routes present, categorized by type.

static

Include this optional parameter to display only static routes.

stats

Displays route statistics.

Usage Guidelines

This command displays static routes configured on the Mobility Master using the ip route command. Use the ip default-gateway command to set the default gatewayGateway is a network node that allows traffic to flow in and out of the network. to the IP address of the interface on the upstream router or switch to which you connect Mobility Master.

Examples

The following example displays the IP address of routers and the VLANsVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. to which they are connected:

(host) [mynode]#show ip route

M - mgmt, U - route usable, * - candidate default, V - RAPNG VPN/Branch

Gateway of last resort is Imported from DHCP to network 0.0.0.0 at cost 10

Gateway of last resort is Imported from CELL to network 0.0.0.0 at cost 10

Gateway of last resort is Imported from PPPOE to network 0.0.0.0 at cost 10

Gateway of last resort is 10.7.73.77 to network 0.0.0.0 at cost 1

S* 0.0.0.0/0 [1/0] via 10.7.73.77*

S 172.0.0.0/8 [1/0] via 172.16.1.253*

Related Commands

Command

Description

ip default-gateway

Configures the default gatewayGateway is a network node that allows traffic to flow in and out of the network. for Mobility Master or the managed device.

ip route

Configures global parameters for configured RADIUSRemote Authentication Dial-In User Service. An Industry-standard network access protocol for remote authentication. It allows authentication, authorization, and accounting of remote users who want to access network resources.  servers.

Command History

Release

Modification

ArubaOS 8.2.1.0

The order of displaying the administrative distance and cost was changed to [AD/Cost] from [Cost/AD] in the command output.

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

License

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/