You are here: Home > CLI Commands > Just_CLI_Topics > show ipc statistics app-ap

show ipc statistics app-ap

show ipc statistics app-ap {am|ap-stm|ofald|sapd}

ap-name <ap-name>

bssid <bssid>

ip-addr <ip-addr>

Description

This command displays the Inter Process Communication (IPC) statistics for a specific AP or BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly..

Syntax

Parameter

Description

am

Show IPC statistics for an air monitor.

ap-stm

Show IPC statistics for AP station management communication.

ofald

OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. Agent Lite Daemon. Show OpenFlowOpenFlow is an open communications interface between control plane and the forwarding layers of a network. Agent statistics running on the AP.

sapd

Show IPC statistics for the AP management process on the AP.

ap-name <ap-name>

Show IPC statistics for an AP with a specific name.

bssid <bssid>

Show IPC statistics for a specific Basic Service Set Identifier (BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly.). An AP’s BSSIDBasic Service Set Identifier. The BSSID identifies a particular BSS within an area. In infrastructure BSS networks, the BSSID is the MAC address of the AP. In independent BSS or ad hoc networks, the BSSID is generated randomly. is usually the AP’s MACMedia Access Control. A MAC address is a unique identifier assigned to network interfaces for communications on a network. address.

ip-addr <ip-addr>

Show IPC statistics for an AP with a specific IP address. Enter the IP address in dotted-decimal format.

Usage Guidelines

Execute this command under the supervision of Aruba TACTechnical Assistance Center. to troubleshoot application errors. This command should be executed on a standby controller or managed device where the APs terminate.

Example

The following example shows IPC statistics for the station management process on an AP named corp-AP-115.

(host-md) #show ipc statistics app-ap ap-stm ap-name corp-AP-115

IP: 168778491, IP_STR: 10.15.90.251

 

Local Statistics

To application Tx Msg Tx Blk Tx Ret Tx Fail Rx Ack Rx Msg Rx Drop Rx Err Tx Ack Rx Silent Drops

SAPM Client 0 0 0 0 0 40 0 0 0 0

Kernel PAPI Statistics

RxSockbufSize RxSockbufHimark CurRxQLen MaxRxQLen Drops

0 0 0 0 0

Remote Device 10.15.88.100 Statistics

To application Tx Msg Tx Blk Tx Ret Tx Fail Rx Ack Rx Msg Rx Drop Rx Err Tx Ack Rx Silent Drops

14302 0 0 0 0 0 1 0 0 1 0

Allocated Buffers 1

Static Buffers 4

Static Buffer Size 1400

The output of this command includes the following data columns:

Parameter

Description

Tx Msg

Number of transmitted messages.

Tx Blk

Number of blocking messages transmitted.

Tx Ret

Number of transmitted messages that were returned.

Tx Fail

Number of failure messages that were transmitted.

Rx Ack

Number of received acknowledgments.

Rx Msg

Number of received messages.

Rx Drop

Number of received messages that were dropped.

Rx Err

Number of received messages with errors.

Tx Ack

Number of transmitted acknowledgments.

Allocated Buffers

Number of allocated buffers for IPC messages.

Static Buffers

Number of static buffers for IPC messages.

Static Buffer Size

Size of the static buffer.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Managed Device.

/*]]>*/