You are here: Home > CLI Commands > Just_CLI_Topics > show jitter

show jitter

show jitter <probe_ip> <src_intf>

Description

This command displays the debug messages for the IPsecInternet Protocol security. IPsec is a protocol suite for secure IP communications that authenticates and encrypts each IP packet in a communication session. tunnel manager.

Syntax

Command

Description

<probe_ip>

IP address of a remote host to which the managed device is connected.

<src_intf>

Source interface VLANVirtual Local Area Network. In computer networking, a single Layer 2 network may be partitioned to create multiple distinct broadcast domains, which are mutually isolated so that packets can only pass between them through one or more routers; such a domain is referred to as a Virtual Local Area Network, Virtual LAN, or VLAN. of a remote host to which the managed device is connected.

Usage Guidelines

This command should be executed from the managed device only.

Related Commands

Command

Description

ip probe health-check

This command configures WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. health-check ping-probes for measuring WANWide Area Network. WAN is a telecommunications network or computer network that extends over a large geographical distance. availability and latency on managed device up-links.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable mode on Managed Device.

/*]]>*/