You are here: Home > CLI Commands > Just_CLI_Topics > show lc-rap-pool

show lc-rap-pool

show lc-rap-pool <pool_name>

Description

This command displays the remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. inner IP pool for cluster deployment.

Syntax

Parameter

Description

pool_name

Name of the local IP pool to show.

Example

The output of the example below displays the remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. inner IP pool that can be used for cluster deployment.

(host) [mynode] (config) #show lc-rap-pool rap-cluster

IP addresses used in pool rap-cluster

3.1.1.3-3.1.1.10

Total:-

8 IPs used - 51134 IPs free - 51142 IPs configured

LC RAP Pool Total Allocs/Deallocs/Reserves : 8/0/0

LC RAP Pool Allocs/Deallocs/Reserves(succ/fail) : 8/0/(0/0)

Related Commands

Command

Description

lc-rap-pool

This command is used to configure the Remote APRemote APs extend corporate network to the users working from home or at temporary work sites. Remote APs are deplyed at branch office sites and are connected to the central network on a WAN link. inner IP pool for cluster deployment.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced

Command Information

Platform

Licensing

Command Mode

All platforms

Base operating system.

Config mode on Mobility Master.

/*]]>*/