You are here: Home > CLI Commands > Just_CLI_Topics > show lcd-menu

show lcd-menu

show lcd-menu

Description

This command displays the current LCDLiquid Crystal Display. LCD is the technology used for displays in notebook and other smaller computers. Like LED and gas-plasma technologies, LCDs allow displays to be much thinner than the cathode ray tube technology. Menu configuration on the managed device.

Syntax

No parameters.

Example

The following example displays the output of the show lcd-menu command.

(host) [mynode] #show lcd-menu

 

lcd-menu

--------

Parameter Value

--------- -----

menu maintenance upgrade-image partition0 enabled

menu maintenance upgrade-image partition1 enabled

menu maintenance upgrade-image enabled

menu maintenance upload-config enabled

menu maintenance factory-default enabled

menu maintenance media-eject enabled

menu maintenance reload-system enabled

menu maintenance halt-system enabled

menu maintenance enabled

menu enabled

Related Commands

Command

Description

lcd-menu

This command allows you to enable or disable the LCDLiquid Crystal Display. LCD is the technology used for displays in notebook and other smaller computers. Like LED and gas-plasma technologies, LCDs allow displays to be much thinner than the cathode ray tube technology. menu either completely or for specific operations.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/