You are here: Home > CLI Commands > Just_CLI_Topics > show license debug

show license debug

show license debug

Description

Displays a summary of Mobility Master's licensing role and IP address.

Syntax

No parameters

Example

The following example shows the output of the show license debug command.

(host)[node] # show license debug

 

Summary of licensing state

Centralized Licensing: Enabled

Switch Role: Master

License Role: License Server

Switch IP: 10.16.16.160

The output of this command includes the following data columns:

Parameter

Description

Centralized licensing

Shows if centralized licensing is enable or disabled.

Switch Role

Role of the device using the configuration on which this command is run.

License Role

Licensing role of the controller on which this command is run. Mobility Master be a licensing client or a licensing server. Managed devices can be licensing clients only.

Master IP

IP address used by Mobility Master. If a Mobility Master redundant pair is using VRRPVirtual Router Redundancy Protocol. VRRP is an election protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN., this parameter displays the VRRPVirtual Router Redundancy Protocol. VRRP is an election protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN. virtual IP address.

Switch IP

IP address assigned to the device using the configuration on which this command is run.

License Server IP

Mobility Master IP address.

Related Commands

Command

Description

show license aggregate

This command is used to view additional statistics for the licenses in each license pool

Command History

Release

Modification

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system

Enable and config mode on Mobility Master and managed devices.

/*]]>*/