You are here: Home > CLI Commands > Just_CLI_Topics > show log all

show log all

show log all|ap-debug|arm|arm-user-debug|errorlog|network|security|system|user|user-debug|wireless [<number>]

Description

Show the log files on Mobility Master or a managed device.

Syntax

Parameter

Description

all

Issue the command show log all to display all log files. Include this parameter after one of the log file types (for example, show log security all) to display all log files of the selected type.

ap-debug

Display AP debug log files.

arm

Display ARMAdaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment. log files.

arm-user-debug

Display ARMAdaptive Radio Management. ARM dynamically monitors and adjusts the network to ensure that all users are allowed ready access. It enables full utilization of the available spectrum to support maximum number of users by intelligently choosing the best RF channel and transmit power for APs in their current RF environment. user debug log files.

errorlog

Display error log files.

network

Display network log files.

<number>

Include this parameter at the end of the show log command to start displaying the log output from the specified number of lines from the end of the log.

security

Display security log files.

system

Display system log files.

user

Display user log files.

user-debug

Display user debug log files.

wireless

Display wireless log files.

Example

This example shows the most ten recent security log entries for the controller.

 

(host)[node] (config) #show log security 5

May 2 02:11:51 :125022: <WARN> |aaa| Authentication failed for User admin, Logged in from 10.20.34.2 port 62419, Connecting to 10.16.13.18 port 22 connection type SSH

May 2 02:20:03 :126005: <WARN> |wms| |ids| Interfering AP: The system classified an access point (BSSID 94:b9:0f:15:6f:63 and SSID hpn-byod on CHANNEL 6) as interfering. Additional Info: Detector-AP-Name:40:e3:d6:cf:61:96; Detector-AP-MAC:40:e3:d6:76:19:64; Detector-AP-Radio:2.

May 2 02:26:13 :126005: <WARN> |wms| |ids| Interfering AP: The system classified an access point (BSSID 94:b9:0f:15:6f:60 and SSID ethersphere-wpa2 on CHANNEL 6) as interfering. Additional Info: Detector-AP-Name:40:e2:d6:c1:dc:ae; Detector-AP-MAC:40:e2:d6:8d:ca:e0; Detector-AP-Radio:2.

May 2 02:33:47 :126005: <WARN> |wms| |ids| Interfering AP: The system classified an access point (BSSID ac:a3:1e:56:ac:70 and SSID on CHANNEL 40) as interfering. Additional Info: Detector-AP-Name:40:e3:d6:cf:61:96; Detector-AP-MAC:40:e3:d6:76:19:70; Detector-AP-Radio:1.

May 2 02:39:24 :126005: <WARN> |wms| |ids| Interfering AP: The system classified an access point (BSSID 94:b4:0f:15:6f:61 and SSID ethersphere-voip on CHANNEL 6) as interfering. Additional Info: Detector-AP-Name:40:e3:d6:c0:dc:ae; Detector-AP-MAC:40:e3:d6:8d:ca:e0; Detector-AP-Radio:2.

Mar 3 13:57:53 localdb[567]: <133006> <ERRS> |localdb| User admin Failed Authentication

Mar 3 13:57:53 localdb[567]: <133019> <ERRS> |localdb| User admin was not found in the database

Mar 3 13:57:53 localdb[567]: <133019> <ERRS> |localdb| User admin was not found in the database

 

Related Commands

Command

Description

logging

Use this command to specify the IP address of the remote logging server, facility, severity, and the type.

logging-trace-files

The slog_flash application continuously updates log files to the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  storage. An error occurs when the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  storage is removed when the update is in progress. This command is introduced to prompt the user before removing the external USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. , to avoid this error.

Command History

Version

Description

ArubaOS 8.0.0.0

Command introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Configuration mode on Mobility Master.

/*]]>*/