You are here: Home > CLI Commands > Just_CLI_Topics > show log ap-debug

show log ap-debug

show log ap-debug{[<number>][all]}

Description

Show the controller’s AP debug logs.

Syntax

Parameter

Description

<number>

Start displaying the log output from the specified number of lines from the end of the log.

all

Shows all the AP debug logs for the controller.

Example

This example shows the ten most recent AP debug logs for the controller.

(host)[node] #show log ap-debug 10

 

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): wifi0: Base BSSID 00:1a:1e:25:97:d0, 16 available BSSID(s)

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): edev->dev_addr=00:1a:1e:ca:59:7c

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): wifi1: Base BSSID 00:1a:1e:25:97:c0, 16 available BSSID(s)

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): edev->dev_addr=00:1a:1e:ca:59:7c

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): ^H<6>Ethernet Channel Bonding Driver: v3.0.1 (January 9, 2006)

Nov 24 20:54:24 KERNEL(AP39@10.6.1.21): secure_jack_link_state_change: Error finding device eth0

Nov 24 20:54:25 KERNEL(AP39@10.6.1.21): Kernel watchdog refresh ended.

Related Commands

Command

Description

logging

Use this command to specify the IP address of the remote logging server, facility, severity, and the type.

logging-trace-files

The slog_flash application continuously updates log files to the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  storage. An error occurs when the USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices.  storage is removed when the update is in progress. This command is introduced to prompt the user before removing the external USBUniversal Serial Bus. USB is a connection standard that offers a common interface for communication between the external devices and a computer. USB is the most common port used in the client devices. , to avoid this error.

Command History

Release

Modification

ArubaOS 8.0.0.0

Command Introduced.

Command Information

Platforms

Licensing

Command Mode

All platforms

Base operating system.

Enable or Config mode on Mobility Master.

/*]]>*/